CNC router machine WATTSAN М1 1325 S4

Working area:: 1300x2500 mm
Spindle:: 6 kW
Machine size:: 2000 x 3040 x 1780 mm
Weight:: 790 kg

4 working spindles
Increased thickness of housing
Bed with pre-annealing
Reinforced portal
Framed structure

CNC Router Machine WATTSAN М1 1325 S4 slide 1
CNC Router Machine WATTSAN М1 1325 S4 slide 2
CNC Router Machine WATTSAN М1 1325 S4 slide 3
CNC Router Machine WATTSAN М1 1325 S4 slide 4
CNC Router Machine WATTSAN М1 1325 S4 slide 5
CNC Router Machine WATTSAN М1 1325 S4 slide 6
CNC Router Machine WATTSAN М1 1325 S4 slide 7
CNC Router Machine WATTSAN М1 1325 S4 slide 8
CNC Router Machine WATTSAN М1 1325 S4 slide 9
CNC Router Machine WATTSAN М1 1325 S4 slide 10
CNC Router Machine WATTSAN М1 1325 S4 slide 11
CNC Router Machine WATTSAN М1 1325 S4 slide 12

CNC router machine Wattsan M1 1325 S4 — accelerate material processing

The Wattsan M1 1325 S4 cnc router machine is distinguished by the presence of 4 working spindles operating in automatic mode. Such a number of working spindles makes it possible to effectively use the machine for the routine production of facades, doors, windows, casing moldings and other carpentry. The working spindles are changed automatically, which greatly lightens the work of the operator.

The 6 kW spindles are equipped with an ER-32 collet chuck. Only one spindle can work at a time.

The WATTSAN M1 1325 S4 machine has a working field of 1300×2500x300 mm with a lattice table. The portal height of 300 mm makes it possible to increase the processing depth in one pass by 20% compared to the A1 model. And the high strength and stability of the frame provides 10 years of work without distortion and deformation, which significantly minimizes the reject rate and allows you to process heavier workpieces. The processed material is held together by a vacuum table. Pneumatic stops and a vacuum table make the material positioning on the table fast and accurate and facilitate two-sided or rectilinear processing.

Materials

– milling

Brass
Paronite
Copper
Aluminium
MDF
Plexiglass (Acrylic)
Foam rubber
Plastic
Chipboard
Plywood
Wood

Wattsan machine beds will provide for 7 years of machine continuous operation

4 working spindles

With the M1 1313 S4 milling machine, you can process materials 4 times faster. The design of the machine allows the spindles to move beyond the desktop, which facilitates the processing of the ends of products. The system makes it possible to use from 1 to 4 spindles at the same time.
Massive machine bed

On the M1 series machine, unlike A1, the bed is reinforced and has a thickness of 10 mm, which gives high strength and stability of the frame structure and provides 10 years of work without distortion and deformation. And the stiffeners increase the stability of the frame and its tensile strength.
Reinforced portal

The portal side pillars have increased rigidity to allow working with heavy loads, and also ensure the absence of vibrations when working at high speeds. It allows you to use from 1 to 12 spindles, depending on the machine design.
Planetary gear

Milling machines of the M series are equipped with Shimpo planetary gearboxes. They are designed to work with high loads, converting the torque from the servo motor and transferring it to the skew gear, which drives the portal movement. It is used in machines for cutting hard wood and soft metals.
Vacuum table

The M-series machines can be included with a vacuum table, which allows you to quickly fix the sheet material on the table surface. Due to the hard pull, the vacuum table not only fixes, but also aligns thin-sheet materials. For a high-quality result of work, it is very important that the surface of the processed material is smooth.
HIWIN guides

Wattsan machines are equipped with HIWIN guides. They are distinguished by their quality and reliability, unlike analogues. Four closed rows of bearings are 30% superior to similar designs in terms of load capacity and rigidity.
Two-phase stepper motor

These motors are responsible for the machine movement along the Y, X and Z axes. Such motors usually do not break down and are easily replaced. At the request of the customer, the machine is equipped with a stepper motor, a hybrid stepper motor or a servo motor.

Firm frame structure of Wattsan machines

During the machine operation inertia of gentry motion is transferred to the frame which is subjected to significant loads. Therefore material and structure of the machine play a significant role in securing the machine against deformation and breakage.

All frames undergo multi-stage heat treatment within a day followed by milling. Furnace annealing guarantees a frame service life of more than 7 years.
All-welded frame of steel profile provides the right level of rigidity and vibration resistance. High strength and resistance of the frame ensure 10 years of operation without distortion and deformation.

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Experiences from enthusiastic bloggers

I’m extremely happy with the device! Its powerful reinforced frame reduces wobbling which is perfect for engraving at high speeds. I’ve been using it for acrylic glass and the results look really cool.

Heinrich Schüür
A great laser engraver, it can cut significant thicknesses of wood without effort. I used it for both engraving and cutting, and the machine worked wonderfully.

Il Makerstauratore
This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

Riccardo Muscarella
Machine has a perfectly flat surface. It makes repetitive work easier for me!

Matteo Moras
Great job done within an hour. Thanks to the speed of the laser CO2 machine.

Roberto D'Adago
This model is great, and laser precision is crazy, it’s sharp as a razor!

Roger Jungo

Working area:: 1300x2500 mm

Installation type:: Floor-standing

Weight:: 790 kg

Machine size:: 2000 x 3040 x 1780 mm

Frame:: One-piece welded from steel profile

Materials:: Soft Metal, Plexiglass, Wood, Plywood, MDF, Paronite, Plastic, Aluminium, Composite, Chipboard

Idle speed:: 18000 mm/min

Tool lifting height (Z-axis travel):: 300 mm

Dimension of the guides:: HIWIN 25 mm mm

Software:: Newlydraw

Spindle:: 6 kW

Spindle RPM:: 6000-18000 rpm

Collet chuck:: ER-32

Number of axis movements:: 3D

Rotary device (optional):: Yes

Leave your review or question:

No reviews yet

Meesen
09/10/2024

J'aimerai recevoir une offre détaillée sur HomeRecoveryServices BE0761556106

Délais de livraison ?

Installation par vous ou par nous ?

Ça arrive déjà pré monté ?

Garrett
09/10/2024

Bonjour, Meesen !

Nos responsables vous contacteront dès que possible pour vous conseiller sur les détails d'installation et de livraison pour votre pays. Nous vous remercions de votre demande !