Unique selling proposition
-
Engraving and marking
-
No consumables required
-
Marking on any material
-
Sino-Galvo scanner
-
2 years warranty
Brief of Laser marker Wattsan UV TT
WATTSAN UV TT laser marker is a versatile and functional bench-type laser marker
WATTSAN UV TT is a bench-type ultraviolet laser marker machine for the application of graphics or texts on a wide range of materials: leather, fabric, paper, rubber, wood, ceramics, glass, plastic, jewels, diamond anvil, electrical components, silicon slabs, metals and even bananas.
Due to a smaller heat-affected zone, UV TT laser marker can perform cold ablation which allows application of color and monochrome marking on almost all types of materials and accurately treat surfaces inaccessible to CO2 treatment and fiber markers.
The marker design allows working with large products by rotating the scanner to the desired angle. Also the scanner can be removed from the tripod for more convenient operation. Cylindrical products can be treated using the rotating device.
This laser marker is equipped with JPT SEAL DPSS emitter with a power of 3-15 W. It is suitable for working with copper as it uses the conversion of 1064 nm wavelength of fiber laser into 355 nm wavelength of UV laser with the use of two crystals. Different working areas are used for the convenience of work: 150x150 mm, 200x200 mm, 300x300 mm.
Materials
-
Diamond
-
Circuit board
-
Stainless steel
-
Aluminium
-
Brass
-
Copper
-
Stone
-
Leather
-
Plywood
-
Plastic
-
Wood
-
Plexiglas (Acrylic)
-
Glass
-
Cardboard
Wattsan laser markers are easy and convenient to use
-
Ability to work with large products
The design allows rotation of the scanner at the desired angle and fixing the tripod in a convenient way for handling large products. Also, if necessary, the marking scanner can be removed from the tripod and suspended to the ceiling which allows engraving large workpieces.
-
F-Theta lens
The size of the work area changes depending on the size of the installed lens. WATTSAN laser markers are equipped with lenses of two sizes – 85 and 79 mm. If you work in depth on small layouts, it is better to install a lens field diameter, the beam will be thinner and the result will be of higher quality.
-
Focal distance is customized
By reducing the screw pitch, linear marking on the housing and focal distance adjustment flywheel allows to adjust the scanner along Z-axis as smoothly as possible to meet your needs.
-
2-in-1 laser marker
A rotating device can be installed on the laser marker for working with cylindrical, conical, spherical and other shapes. The device holds even fragile materials securely without damaging them and scratching the surface.
Purchase procedure
-
Equipment selection
We assist you in making your choice of a machine matching your needs
-
Sending invoice
We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
-
Payment
In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
-
We check the machine
The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
-
Delivery or pick-up
Either a transport company or you pick up the machine from our warehouse.
-
Launching equipment
We are here to assist you whenever you need support.
Experiences from enthusiastic bloggers
-
A great laser engraver, it can cut significant thicknesses of wood without effort. I used it for both engraving and cutting, and the machine worked wonderfully.
Il Makerstauratore
-
This laser engraver can engrave without any problem. How fast and easy it is able to customize products!
Riccardo Muscarella
-
Machine has a perfectly flat surface. It makes repetitive work easier for me!
Matteo Moras
-
Great job done within an hour. Thanks to the speed of the laser CO2 machine.
Roberto D'Adago
-
This model is great, and laser precision is crazy, it’s sharp as a razor!
Roger Jungo
Technical characteristics
Ask questions
-
Laser markers usually have small working area: from 100*100 to 300*300. You should keep it in mind while choosing the machine.Then you should decide what type of material are you going to work with. For exaple Co2 marker is good for wood, plastic and plexiglass. If you want to mark metal then you should pick fiber laser marker. The choice of emitter depends on the desired result. For example, if you want to do color marking on metal, then IPG or JPT are an excellent choice.
-
It is a permanent image resistant to mechanical damage, acidic and alkaline media, high and low temperatures.
-
It depends on your application. The main selection criterion is the emitter power and the lens. For quick deep engraving or working on highly reflective metals, it is better to use emitters with a power of 50W and a lens with a working area of 110x100mm. For high quality marking a 20-30W emitter and a 200x200 or 300x300 mm lens will do the trick. For more details, please contact Virmer managers: +31852731786, е-mail: info@virmer.com
-
For the hobby, budget markers with MaxPhotonics or Raycus emitters are suitable. However, if your hobby is jewellery making, you should consider machines with IPG emitters from 50W. For more details, please contact Virmer managers: +31852731786,
е-mail: info@virmer.com -
CO2 laser sources mark and engrave organic materials: plywood and all types of wood-based materials, paper and cardboard, leather and faux leather, fabric, glass and mirror, plastics and rubber, stone and ceramics. Fiber emitters mark and engrave metals (ferrous metals, stainless steel, aluminium, titanium, etc), plastics and rubber, leather and faux leather.
Leave your review or question:
Other products
-
Popular Hit
Laser marker WATTSAN FL TT Wattsan FL TT
Learn moreFrom 3 831 € ex.VAT
-
Popular Hit
Laser Surface Cleaning Machine Wattsan 100W Wattsan Cleaning 100W
Learn moreFrom 15 309 € ex.VAT
-
CNC Router Machine WATTSAN M1 1325 RD Wattsan M1 1325 RD
Learn moreFrom 14 288 € ex.VAT
-
Laser marker WATTSAN FL HH Wattsan FL HH
Learn moreFrom 5 095 € ex.VAT
-
Laser Cutting Engraving Machine 100W co2 WATTSAN 1290 ST Wattsan 1290 ST
Learn moreFrom 6 043 € ex.VAT
-
CNC Router Machine WATTSAN M1 6090 Wattsan M1 6090
Learn moreFrom 6 605 € ex.VAT
-
CNC Router Machine WATTSAN M1 2040 Wattsan M1 2040
Learn moreFrom 17 972 € ex.VAT
