Laser marker WATTSAN CO2 LT

Working area:: 200x200 mm
Laser power:: 40-60 W
Machine size:: 1610 x 360 x 680 mm
Packing size:: 1610x360x680 mm
Weight:: 45 kg

2 years warranty
High precision and speed
Sino-Galvo scanner
No consumables required
Easy service

Laser marker WATTSAN CO2 LT slide 1
Laser marker WATTSAN CO2 LT slide 2
Laser marker WATTSAN CO2 LT slide 3
Laser marker WATTSAN CO2 LT slide 4
Laser marker WATTSAN CO2 LT slide 5

WATTSAN CO2 LT laser marker provides high speed and efficiency

WATTSAN CO2 LT laser marker machine is designed for working with leather, fiber, paper, rubber, wood, ceramics, paper, plastic and other materials. It is ideal for applying logos, photos and alphanumeric information. It has a lifting working bench which is necessary for focusing and processing materials with different thicknesses. This laser marker is equipped with a foot pedal for mass production. The machine can also be equipped with a rotating device for working with cylindrical products.

Laser marker is controlled via EzСad system which changes the text in real time during laser treatment. Excel sheets are supported. EzCad intuitive interface allows mastering new equipment in a matter of few hours. Vector and bit map formats of images are supported, for example: BMP, PLT, CDR, DXF, AI, SVG, etc., and the software has a built-in generator for marking and barcoding.

The machine is equipped with a laser tube with a choice of power of 30 or 50 W and a service life of up to 10 000 hours. Although this type of laser is less durable than fiber optic laser, it is much cheaper to replace. Different working areas are used for the convenience of work: 150x150 mm, 200x200 mm, 300x300 mm.

Materials

– engraving
– marking

Wood
Plywood
Cardboard
Chipboard
Plastic
Rubber
Leather
Plexiglas (Acrylic)
PET
Bamboo products

Wattsan laser markers are easy and convenient to use

F-Theta lens

The size of the work area changes depending on the size of the installed lens. WATTSAN laser markers are equipped with lenses of two sizes – 85 and 79 mm. If you work in depth on small layouts, it is better to install a lens field diameter, the beam will be thinner and the result will be of higher quality.
Laser tube

You can choose laser tubes with power from 30 to 50 W. They can mark non-metallic materials with high speed and efficiency. With low power, this transmitter is easy to replace and has a record-long service life of 10 000 hours.
2-in-1 laser marker

A rotating device can be installed on the laser marker for working with cylindrical, conical, spherical and other shapes. The device holds even fragile materials securely without damaging them and scratching the surface.
Lifting bench

When working with small products, focus can be adjusted by lifting and lowering the bench. It is most suitable for working with sheet materials for the production of plates, name plates and showpieces. It produces a high-quality detailed image with robust edges.

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Experiences from enthusiastic bloggers

A great laser engraver, it can cut significant thicknesses of wood without effort. I used it for both engraving and cutting, and the machine worked wonderfully.

Il Makerstauratore
This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

Riccardo Muscarella
Machine has a perfectly flat surface. It makes repetitive work easier for me!

Matteo Moras
Great job done within an hour. Thanks to the speed of the laser CO2 machine.

Roberto D'Adago
This model is great, and laser precision is crazy, it’s sharp as a razor!

Roger Jungo

Machine size:: 1610 x 360 x 680 mm

Packing size:: 1610x360x680 mm

Weight:: 45 kg

Rotator seats:: Yes

Working area:: 200x200 mm

Installation type:: Bench-type

Materials:: Rubber, Fabric, Plastic, Leather and leatherette, Ceramic, Wood

Laser power:: 40-60 W

Wave length:: 1064 nm

Laser tube lifetime:: 6000-10000 h

Emitter life:: 6000-10000 h

ZnSe lens:: F-Theta D80

Laser type:: Yongli

Laser output frequency:: 20000

Cooling:: Water

Table model:: Lifting

Marking speed:: 7000

Electric power supply:: 220 V

Software:: EzCad 2

Control system:: LMCUSBv1

Power consumption:: 700 W

Supported format:: PLT, DST, AI, DXF, BMP, JPG, CAD, CDR, DWG, PCX

Software:: EzCad 2 piece

Rotary device (optional):: Option

Ask questions

Laser markers usually have small working area: from 100*100 to 300*300. You should keep it in mind while choosing the machine.Then you should decide what type of material are you going to work with. For exaple Co2 marker is good for wood, plastic and plexiglass. If you want to mark metal then you should pick fiber laser marker. The choice of emitter depends on the desired result. For example, if you want to do color marking on metal, then IPG or JPT are an excellent choice.
It is a permanent image resistant to mechanical damage, acidic and alkaline media, high and low temperatures.
It depends on your application. The main selection criterion is the emitter power and the lens. For quick deep engraving or working on highly reflective metals, it is better to use emitters with a power of 50W and a lens with a working area of 110x100mm. For high quality marking a 20-30W emitter and a 200x200 or 300x300 mm lens will do the trick. For more details, please contact Virmer managers: +31852731786, е-mail: info@virmer.com
For the hobby, budget markers with MaxPhotonics or Raycus emitters are suitable. However, if your hobby is jewellery making, you should consider machines with IPG emitters from 50W. For more details, please contact Virmer managers: +31852731786,
е-mail: info@virmer.com
CO2 laser sources mark and engrave organic materials: plywood and all types of wood-based materials, paper and cardboard, leather and faux leather, fabric, glass and mirror, plastics and rubber, stone and ceramics. Fiber emitters mark and engrave metals (ferrous metals, stainless steel, aluminium, titanium, etc), plastics and rubber, leather and faux leather.

Leave your review or question:

No reviews yet

No questions yet

Laser marker WATTSAN CO2 LT

Unique selling proposition

2 years warranty

High precision and speed

Sino-Galvo scanner

No consumables required

Easy service

Brief of Laser marker WATTSAN CO2 LT