Laser surface cleaning machine Wattsan CW 6000 JPT

Cooling:: water
Laser power:: 6000 W
Machine size:: 1075x664x1055 mm
Packing size:: 1400x860x1200 mm
Laser source:: JPT, Raycus
Weight:: 235 kg

Laser Surface Cleaning Machine Wattsan CW 6000

More than 100,000 hours of use
Delicate cleaning without damage
No consumables required
Eco-friendly
Cleaning without thermally-induced displacement

Wattsan CW 6000 hand-held laser cleaning machine allows for a mode to suit your application

The Wattsan CW continuous laser cleaning is a modern, high-tech, and high-speed method of cleaning surfaces. The laser cleaning equipment is ideal for all types of surfaces. It easily removes rust from metal products, layers of paint, varnish, and other coatings or deposits. The surface is degreased and the effects of oxidation and carbon deposits are removed. The speed of a continuous cleaning machine is several times faster than the one of a pulsed cleaning. A wide range of settings allows the use of laser cleaning in various fields. Cleaning can be carried out at any angle in the most inaccessible places, which allows you to extend the life of structures made of different types of metals. There are no consumables (sand and other abrasives), no need for a workshop or metal cabinet. After cleaning, only the destroyed particles (dust) of the cleaned "foreign" layer remain. A special protective suit for the employee is not required while working with the equipment. No mechanical post-treatment after cleaning is required.

Materials

– cleaning

Dye
Electroplating
Oil paint
Oxide coating
Oxidized rusty metal
Rubber
Rust
Soot

Wattsan laser cleaning are thoughtfully designed

Wide range of settings

The ability to adjust the beam size and geometry allows you to use laser cleaning for a variety of applications. A small spot helps to increase power concentration and is able to reach hard-to-reach areas, while a wide treatment area (up to 100 by 20mm) significantly increases cleaning speed. Cleaning can be carried out from any angle.
Two types of handheld module

Depending on the client's task, the handheld module can be supplied in two versions with a front lens position and with a lower lens position. The setting of the focal length on all laser cleaning machines is done manually, and it is the positioning of the lens that determines which task you will be able to handle more effectively.
Non-contact technology

Laser cleaning applies short powerful pulses to the layer to be cleaned, which vaporise or destroy the foreign material. The surface below the foreign layer is not damaged and is ready for further technological processes, without post-treatment.

Comparison table

Cleaning thickness (Nm)	Cleaning speed (mm/s)	Cleaning line width (mm)	Performance (m2/h)
Oxide layer
≤25	Difficult to clean	-	-
≤50	Difficult to clean	-	-
>50	Difficult to clean	-	-
Rust
Cleaning thickness (Nm)	Cleaning speed (mm/s)	Cleaning line width (mm)	Performance (m2/h)
≤50	25	140	12
≤100	15	70	6
>100	15	60	3
Paint / Coating
Cleaning thickness (Nm)	Cleaning speed (mm/s)	Cleaning line width (mm)	Performance (m2/h)
≤50	20	70	5
≤100	15	60	3
>100	10	40	1,5
Rubber / Soot
Cleaning thickness (Nm)	Cleaning speed (mm/s)	Cleaning line width (mm)	Performance (m2/h)
≤50	25	80	7
≤100	20	60	4
>100	10	60	2

The scanner is easy to operate and requires little maintenance.

F-Theta lenses

It ensures a flat field and maximum quality of focused radiation on the surface of the processed material
Mirror galvanometers

Mirror galvanometers located along the X and Y axes are designed to align the laser beam.
Collimator module

It converts the output laser radiation into a directed parallel beam, minimizing its divergence.

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Experiences from enthusiastic bloggers

I’m extremely happy with the device! Its powerful reinforced frame reduces wobbling which is perfect for engraving at high speeds. I’ve been using it for acrylic glass and the results look really cool.

Heinrich Schüür
A great laser engraver, it can cut significant thicknesses of wood without effort. I used it for both engraving and cutting, and the machine worked wonderfully.

Il Makerstauratore
This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

Riccardo Muscarella
Machine has a perfectly flat surface. It makes repetitive work easier for me!

Matteo Moras
Great job done within an hour. Thanks to the speed of the laser CO2 machine.

Roberto D'Adago
This model is great, and laser precision is crazy, it’s sharp as a razor!

Roger Jungo

Machine size:: 1075x664x1055 mm

Packing size:: 1400x860x1200 mm

Welding head weight:: 2.2 kg

Fiber length:: 8 m

Weight:: 235 kg

Cooling:: water

Operating temperature range:: 5-40 ℃

Laser power:: 6000 W

Scan width range:: 300-500 mm

Focal length:: F1500

Operating mode:: Continuous wave

Operating humidity range:: 30-70 %

Laser frequency:: up to 20 kHz

Laser source:: JPT, Raycus

Laser wavelength:: 1080 nm

Control system:: RuiDa

Scanner MODEL:: RelFar FWH60-C30A

Mode setting:: Yes

Electric power supply:: 220 V

Ask questions

Laser cleaning removes corrosion, rust, paint-and-lacquer coatings, scale, carbon deposits, electroplating coatings, adhesive coatings, and organic deposits.
Compared to mechanical and chemical methods, this method is not traumatic – it does not imply human contact with the treated surface, and is environmentally friendly – there are no toxic vapors. The risk of damaging the metal from which you remove rust or paint is also eliminated.
There are a few basic parameters that affect the choice when buying the laser cleaning machine, namely: pulsed or continuous mode of radiation, power of laser head, type of cooling, laser cleaning functionality, and requirements to the supplier. First of all, it is necessary to decide which tasks will prevail – delicate cleaning or handling with gross contaminations and deposits. This determines which type of radiation to choose – pulsed or continuous.
The service life of the laser emitter is up to 100 000 hours, which is 30 years of continuous operation 8 hours a day, 5 days a week.
Laser cleaning machine performs its main functions fast and allows you to save time on dismantling. Therefore, laser cleaning is 6-8 times faster than chemical cleaning methods.