Unique selling proposition
-
More than 100,000 hours of use
-
Delicate cleaning without damage
-
No consumables required
-
Eco-friendly
-
Cleaning without thermally-induced displacement
Brief of Laser Surface Cleaning Machine Wattsan CW JPT
Wattsan CW hand-held laser cleaning machine allows for a mode to suit your application
The Wattsan CW continuous laser cleaning is a modern, high-tech, and high-speed method of cleaning surfaces. The laser cleaning equipment is ideal for all types of surfaces. It easily removes rust from metal products, layers of paint, varnish, and other coatings or deposits. The surface is degreased and the effects of oxidation and carbon deposits are removed. The speed of a continuous cleaning machine is several times faster than the one of a pulsed cleaning. A wide range of settings allows the use of laser cleaning in various fields. Cleaning can be carried out at any angle in the most inaccessible places, which allows you to extend the life of structures made of different types of metals. There are no consumables (sand and other abrasives), no need for a workshop or metal cabinet. After cleaning, only the destroyed particles (dust) of the cleaned "foreign" layer remain. A special protective suit for the employee is not required while working with the equipment. No mechanical post-treatment after cleaning is required.
Wattsan laser cleaning are thoughtfully designed
-
Wide range of settings
The ability to adjust the beam size and geometry allows you to use laser cleaning for a variety of applications. A small spot helps to increase power concentration and is able to reach hard-to-reach areas, while a wide treatment area (up to 100 by 20mm) significantly increases cleaning speed. Cleaning can be carried out from any angle.
-
Two types of handheld module
Depending on the client's task, the handheld module can be supplied in two versions with a front lens position and with a lower lens position. The setting of the focal length on all laser cleaning machines is done manually, and it is the positioning of the lens that determines which task you will be able to handle more effectively.
-
Non-contact technology
Laser cleaning applies short powerful pulses to the layer to be cleaned, which vaporise or destroy the foreign material. The surface below the foreign layer is not damaged and is ready for further technological processes, without post-treatment.
Comparison table
Oxide layer
|
|||
Cleaning thickness (Nm) | Cleaning speed (mm/s) | Cleaning line width (mm) | Performance (m2/h) |
---|---|---|---|
≤25 | Difficult to clean | - | - |
≤50 | Difficult to clean | - | - |
>50 | Difficult to clean | - | - |
Rust
|
|||
Cleaning thickness (Nm) | Cleaning speed (mm/s) | Cleaning line width (mm) | Performance (m2/h) |
≤50 | 25 | 140 | 12 |
≤100 | 15 | 70 | 6 |
>100 | 15 | 60 | 3 |
Paint / Coating
|
|||
Cleaning thickness (Nm) | Cleaning speed (mm/s) | Cleaning line width (mm) | Performance (m2/h) |
≤50 | 20 | 70 | 5 |
≤100 | 15 | 60 | 3 |
>100 | 10 | 40 | 1,5 |
Rubber / Soot
|
|||
Cleaning thickness (Nm) | Cleaning speed (mm/s) | Cleaning line width (mm) | Performance (m2/h) |
≤50 | 25 | 80 | 7 |
≤100 | 20 | 60 | 4 |
>100 | 10 | 60 | 2 |
The scanner is easy to operate and requires little maintenance.
Purchase procedure
-
Equipment selection
We assist you in making your choice of a machine matching your needs
-
Sending invoice
We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
-
Payment
In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
-
We check the machine
The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
-
Delivery or pick-up
Either a transport company or you pick up the machine from our warehouse.
-
Launching equipment
We are here to assist you whenever you need support.
Experiences from enthusiastic bloggers
Technical characteristics
Ask questions
-
Laser cleaning removes corrosion, rust, paint-and-lacquer coatings, scale, carbon deposits, electroplating coatings, adhesive coatings, and organic deposits.
-
Compared to mechanical and chemical methods, this method is not traumatic – it does not imply human contact with the treated surface, and is environmentally friendly – there are no toxic vapors. The risk of damaging the metal from which you remove rust or paint is also eliminated.
-
There are a few basic parameters that affect the choice when buying the laser cleaning machine, namely: pulsed or continuous mode of radiation, power of laser head, type of cooling, laser cleaning functionality, and requirements to the supplier. First of all, it is necessary to decide which tasks will prevail – delicate cleaning or handling with gross contaminations and deposits. This determines which type of radiation to choose – pulsed or continuous.
-
The service life of the laser emitter is up to 100 000 hours, which is 30 years of continuous operation 8 hours a day, 5 days a week.
-
Laser cleaning machine performs its main functions fast and allows you to save time on dismantling. Therefore, laser cleaning is 6-8 times faster than chemical cleaning methods.