Laser surface cleaning machine Wattsan 500W

Cooling:: water
Laser power:: 500 W
Machine size:: 1120x550x1120 mm
Packing size:: 1400х860х1200 mm
Laser source:: JPT
Weight:: 180 kg

Laser Surface Cleaning Machine Wattsan 500W

More than 100,000 hours of use
Delicate cleaning without damage
No consumables required
Eco-friendly
Cleaning without thermally-induced displacement

Laser Surface Cleaning Machine Wattsan 500W slide 1
Laser Surface Cleaning Machine Wattsan 500W slide 2
Laser Surface Cleaning Machine Wattsan 500W slide 3
Laser Surface Cleaning Machine Wattsan 500W slide 4
Laser Surface Cleaning Machine Wattsan 500W slide 5
Laser Surface Cleaning Machine Wattsan 500W slide 6
Laser Surface Cleaning Machine Wattsan 500W slide 7
Laser Surface Cleaning Machine Wattsan 500W slide 8
Laser Surface Cleaning Machine Wattsan 500W slide 9
Laser Surface Cleaning Machine Wattsan 500W slide 10
Laser Surface Cleaning Machine Wattsan 500W slide 11
Laser Surface Cleaning Machine Wattsan 500W slide 12
Laser Surface Cleaning Machine Wattsan 500W slide 13
Laser Surface Cleaning Machine Wattsan 500W slide 14
Laser Surface Cleaning Machine Wattsan 500W slide 15
Laser Surface Cleaning Machine Wattsan 500W slide 16
Laser Surface Cleaning Machine Wattsan 500W slide 17

Wattsan 500W hand-held laser cleaning machine allows for a mode to suit your application

The Wattsan 500W hand-held laser cleaning machine is a new generation of high-tech equipment for cleaning metal surfaces without damaging or thermally deforming the base material. Removes almost all types of contaminants on metal products: rust, paintwork, oil products, oxide films, scale after welding, and carbon deposits. Pulsed laser cleaning is designed for cleaning large areas. The main task is to remove the layer to be removed without damaging the base. This is especially true when cleaning thin metals, since the machine does not expose the base to heat and, as a result, deformation. A big plus is the speed at which the positive result is immediately visible. The equipment does not make noise during operation, and besides, everyone will cope with its use. In addition to metal surfaces, it cleans adhesive and galvanized materials, as well as products made of plaster and stone.

Materials

– cleaning

Dye
Electroplating
Oil paint
Oxide coating
Oxidized rusty metal
Rubber
Soot

Wattsan laser cleaning are thoughtfully designed

Wide range of settings

The ability to adjust the beam size and geometry allows you to use laser cleaning for a variety of applications. A small spot helps to increase power concentration and is able to reach hard-to-reach areas, while a wide treatment area (up to 100 by 20mm) significantly increases cleaning speed. Cleaning can be carried out from any angle.
Two types of handheld module

Depending on the client's task, the handheld module can be supplied in two versions with a front lens position and with a lower lens position. The setting of the focal length on all laser cleaning machines is done manually, and it is the positioning of the lens that determines which task you will be able to handle more effectively.
Non-contact technology

Laser cleaning applies short powerful pulses to the layer to be cleaned, which vaporise or destroy the foreign material. The surface below the foreign layer is not damaged and is ready for further technological processes, without post-treatment.

The scanner is easy to operate and requires little maintenance.

F-Theta lenses

It ensures a flat field and maximum quality of focused radiation on the surface of the processed material
Mirror galvanometers

Mirror galvanometers located along the X and Y axes are designed to align the laser beam.
Collimator module

It converts the output laser radiation into a directed parallel beam, minimizing its divergence.

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Machine size:: 1120x550x1120 mm

Packing size:: 1400х860х1200 mm

Fiber length:: 5 m

Weight:: 180 kg

Cooling:: water

Operating temperature range:: 5-40 ℃

Laser power:: 500 W

Scan width range:: 20 mm

Scan length range:: 100 mm

Focal length:: F254

Pulse width:: 80-500 ns

Operating mode:: Pulsed

Laser frequency:: 1-1000 kHz

Operating humidity range:: 30-70 %

Laser source:: JPT

Laser wavelength:: 1064 nm

Scanner MODEL:: LC1403D-H

Mode setting:: Yes

Electric power supply:: 220 V

Control system:: SINO-GALVO

Ask questions

Laser cleaning removes corrosion, rust, oil film, paint-and-lacquer coatings, scale, carbon deposits, oil depositions, electroplating coatings, adhesive coatings, and organic deposits.
Compared to mechanical and chemical methods, this method is not traumatic – it does not imply human contact with the treated surface, and is environmentally friendly – there are no toxic vapors. The risk of damaging the metal from which you remove rust or paint is also eliminated.
There are a few basic parameters that affect the choice when buying the laser cleaning machine, namely: pulsed or continuous mode of radiation, power of laser head, type of cooling, laser cleaning functionality, and requirements to the supplier. First of all, it is necessary to decide which tasks will prevail – delicate cleaning or handling with gross contaminations and deposits. This determines which type of radiation to choose – pulsed or continuous.
The service life of the laser emitter is up to 100 000 hours, which is 30 years of continuous operation 8 hours a day, 5 days a week.
Laser cleaning machine performs its main functions fast and allows you to save time on dismantling. Therefore, laser cleaning is 6-8 times faster than chemical cleaning methods.

Laser surface cleaning machine Wattsan 500W

Unique selling proposition

More than 100,000 hours of use

Delicate cleaning without damage

No consumables required

Eco-friendly

Cleaning without thermally-induced displacement

Brief of Laser Surface Cleaning Machine Wattsan 500W