Laser surface cleaning machine Wattsan PW JPT

Cooling:: air, water
Laser power:: 300 W
Machine size:: 1270x700x1280 mm
Packing size:: 1400x860x1200 mm
Laser source:: JPT MOPA
Weight:: 235 kg

Laser Surface Cleaning Machine Wattsan PW JPT

More than 100,000 hours of use
Delicate cleaning without damage
No consumables required
Eco-friendly
Cleaning without thermally-induced displacement

Laser Surface Cleaning Machine Wattsan PW JPT slide 1
Laser Surface Cleaning Machine Wattsan PW JPT slide 2
Laser Surface Cleaning Machine Wattsan PW JPT slide 3
Laser Surface Cleaning Machine Wattsan PW JPT slide 4
Laser Surface Cleaning Machine Wattsan PW JPT slide 5
Laser Surface Cleaning Machine Wattsan PW JPT slide 6
Laser Surface Cleaning Machine Wattsan PW JPT slide 7
Laser Surface Cleaning Machine Wattsan PW JPT slide 8
Laser Surface Cleaning Machine Wattsan PW JPT slide 9
Laser Surface Cleaning Machine Wattsan PW JPT slide 10
Laser Surface Cleaning Machine Wattsan PW JPT slide 11
Laser Surface Cleaning Machine Wattsan PW JPT slide 12
Laser Surface Cleaning Machine Wattsan PW JPT slide 13
Laser Surface Cleaning Machine Wattsan PW JPT slide 14
Laser Surface Cleaning Machine Wattsan PW JPT slide 15

Wattsan PW hand-held laser cleaning machine allows for a mode to suit your application

The Wattsan PW hand-held laser cleaning machine is a new generation of high-tech equipment for cleaning metal surfaces without damaging or thermally deforming the base material. Removes almost all types of contaminants on metal products: rust, paintwork, oil products, oxide films, scale after welding, and carbon deposits. Pulsed laser cleaning is designed for cleaning large areas. The main task is to remove the layer to be removed without damaging the base. This is especially true when cleaning thin metals, since the machine does not expose the base to heat and, as a result, deformation. A big plus is the speed at which the positive result is immediately visible. The equipment does not make noise during operation, and besides, everyone will cope with its use. In addition to metal surfaces, it cleans adhesive and galvanized materials, as well as products made of plaster and stone.

Materials

– cleaning

Dye
Electroplating
Oil paint
Oxide coating
Oxidized rusty metal
Rubber
Rust
Soot

Wattsan laser cleaning are thoughtfully designed

Wide range of settings

The ability to adjust the beam size and geometry allows you to use laser cleaning for a variety of applications. A small spot helps to increase power concentration and is able to reach hard-to-reach areas, while a wide treatment area (up to 100 by 20mm) significantly increases cleaning speed. Cleaning can be carried out from any angle.
Two types of handheld module

Depending on the client's task, the handheld module can be supplied in two versions with a front lens position and with a lower lens position. The setting of the focal length on all laser cleaning machines is done manually, and it is the positioning of the lens that determines which task you will be able to handle more effectively.
Non-contact technology

Laser cleaning applies short powerful pulses to the layer to be cleaned, which vaporise or destroy the foreign material. The surface below the foreign layer is not damaged and is ready for further technological processes, without post-treatment.

Comparison table

Cleaning thickness (Nm)	Cleaning speed (mm/s)	Cleaning line width (mm)	Performance (m2/h)
Oxide layer
≤25	25	140	12
≤50	25	70	6
>50	20	60	4
Rust
Cleaning thickness (Nm)	Cleaning speed (mm/s)	Cleaning line width (mm)	Performance (m2/h)
≤50	20	100	8
≤100	20	50	4
>100	10	50	2
Paint / Coating
Cleaning thickness (Nm)	Cleaning speed (mm/s)	Cleaning line width (mm)	Performance (m2/h)
≤50	15	50	2,5
≤100	8	40	1,2
>100	5	35	0,6
Rubber / Soot
Cleaning thickness (Nm)	Cleaning speed (mm/s)	Cleaning line width (mm)	Performance (m2/h)
≤25	20	60	4
≤50	15	50	2,5
>50	10	40	1,5

The scanner is easy to operate and requires little maintenance.

F-Theta lenses

It ensures a flat field and maximum quality of focused radiation on the surface of the processed material
Mirror galvanometers

Mirror galvanometers located along the X and Y axes are designed to align the laser beam.
Collimator module

It converts the output laser radiation into a directed parallel beam, minimizing its divergence.

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Experiences from enthusiastic bloggers

I’m extremely happy with the device! Its powerful reinforced frame reduces wobbling which is perfect for engraving at high speeds. I’ve been using it for acrylic glass and the results look really cool.

Heinrich Schüür
A great laser engraver, it can cut significant thicknesses of wood without effort. I used it for both engraving and cutting, and the machine worked wonderfully.

Il Makerstauratore
This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

Riccardo Muscarella
Machine has a perfectly flat surface. It makes repetitive work easier for me!

Matteo Moras
Great job done within an hour. Thanks to the speed of the laser CO2 machine.

Roberto D'Adago
This model is great, and laser precision is crazy, it’s sharp as a razor!

Roger Jungo

Weight:: 235 kg

Machine size:: 1270x700x1280 mm

Packing size:: 1400x860x1200 mm

Welding head weight:: 0.76 kg

Fiber length:: 5 m

Materials:: Copper, Mild steel, Stainless steel, Aluminium

Laser frequency:: 1-4000 kHz

Operating humidity range:: 30-70 %

Laser source:: JPT MOPA

Maximum pulse power:: 15/50

Laser wavelength:: 1060 nm

Cooling:: air, water

Operating temperature range:: 0-40 ℃

Laser power:: 300 W

Focal length:: F254

Pulse width:: 2-500ns/30-500ns ns

Operating mode:: Pulsed

Control system:: RuiDa

Scanner MODEL:: RelFar FWP50-P10A / FWP50-P20A

Mode setting:: Yes

Ask questions

Laser cleaning removes corrosion, rust, paint-and-lacquer coatings, scale, carbon deposits, electroplating coatings, adhesive coatings, and organic deposits.
Compared to mechanical and chemical methods, this method is not traumatic – it does not imply human contact with the treated surface, and is environmentally friendly – there are no toxic vapors. The risk of damaging the metal from which you remove rust or paint is also eliminated.
There are a few basic parameters that affect the choice when buying the laser cleaning machine, namely: pulsed or continuous mode of radiation, power of laser head, type of cooling, laser cleaning functionality, and requirements to the supplier. First of all, it is necessary to decide which tasks will prevail – delicate cleaning or handling with gross contaminations and deposits. This determines which type of radiation to choose – pulsed or continuous.
The service life of the laser emitter is up to 100 000 hours, which is 30 years of continuous operation 8 hours a day, 5 days a week.
Laser cleaning machine performs its main functions fast and allows you to save time on dismantling. Therefore, laser cleaning is 6-8 times faster than chemical cleaning methods.

Leave your review or question:

5.00

Ratings – 1

No reviews yet

Joan Taule
09/10/2024

Desearia informacion de una maquina Laser portàtil de limpieza para madera, plazo entrega, caracteristicas y precios

Les mando alguna foto del trabajos para realizar

Gracias

Joan Taule

Garrett
09/10/2024

¡Hola, Joan!

Nuestros responsables se pondrán en contacto contigo por correo electrónico lo antes posible para consultarte. También puedes compartir tus fotos con ellos o adjuntarlas en este hilo de preguntas. Muchas gracias.
Reifenservice Peter Siska
02/06/2024

Hallo zusammen.

Ich bitte Sie um Anruf, es handelt sich um Gerät Pulslaser Reinigungmaschine, zwischen 200-300w, und Minimum 1,8mj.

Vielen Dank im voraus.

Peter Siska

Garrett
02/06/2024

Hallo, Peter!

Wir haben Ihre Kontaktdaten an unsere Vertriebsleiter weitergeleitet. Sie werden Sie so schnell wie möglich kontaktieren. Vielen Dank, dass Sie sich gemeldet haben!