Laser machine WATTSAN 1610 DUOS CONVEYOR

Working area:: 1600x1000 mm
Laser power:: 100-130 W
Working table lowering depth:: 40 mm
Positioning precision:: 0,03 mm
Machine size:: 2200 x 1800 x 1105 mm
Packing size:: 2300 x 1980 x 1200 mm
Weight:: 770 kg

All characteristics

11 375 € ex.VAT

Price on request

Make a request

Laser Cutting Machine 130W co2 WATTSAN 1610 DUOS CONVEYOR

2 laser heads
Conveyer table
Framed structure
Lifelong support
Product contouring system

1 / 18

Wattsan 1610 Duos Conveyor laser machine — speed and high volume production

Wattsan 1610 Duos Conveyor co2 laser machine is suitable for both beginners and experienced businessmen in small and medium-sized enterprises for small-scale production. This is a laser machine, which is primarily designed for stream cutting of fabric, leather, leatherette and other rolled materials. But this does not mean that the range of materials for cutting and engraving is limited only to fabric, the machine can handle plywood, cardboard, rubber, acrylic, plexiglass, wood, etc.

Combinations of a conveyor table and two heads give a high output. And the universal working area of 1600*1000 mm fits most fabric rolls up to 155 cm wideness. With Wattsan machines, you can forget about such a problem as loose fabrics, you don't need any additional processing.

Materials

– engraving
– cutting

Wool
Resin
Marble
Granite
Bamboo products
Crystale jade
Ceramic tile
Paronite
Stone
Glass
MDF
Foam rubber
Polyethylene foam
Plexiglass (Acrylic)
Fabric
Leather
Rubber
Plastic
Cardboard
Plywood
Wood

Wattsan laser machines are thoughtfully designed

Frame structure

The main feature and base of Wattsan machines is a frame structure. The frame design ensures vibration-free operation at high speeds during engraving. This makes the machines less likely to require maintenance. Machine frames are continually being improved to increase the rigidity of Wattsan machines.
Conveyor table

The conveyor table spreads the material evenly over the working area, and then the material is cut. The main task of the conveyor table is to speed up the working process without the machine operator's involvement. Cutting thick materials (wood, plastics, etc.) on a conveyor table is not recommended.
2 laser heads

The parallel operation of two laser heads allows you to double the productivity of the machine, which is quite useful for processing fabrics and producing souvenirs, puzzles, etc. The laser heads can divide the working field in half (for cutting or engraving large items) or work in close proximity to each other. A single laser head can also be used for the production of particularly large items.

ST model

Equipped with a static table, suitable for processing flat materials of consistent thickness. This setup is ideal for standard cutting and engraving tasks where material height remains uniform.

Fixed

Height Adjustability

No

Supports Rotary Device

Limited

Versatility

Flat sheets and repetitive work

Application
LT model

Features a lift table that can be adjusted vertically, accommodating materials of varying thicknesses and enabling rotary device usage for cylindrical objects. This design offers greater versatility for diverse applications.

Adjustable

Height Adjustability

Yes

Supports Rotary Device

High

Versatility

Varied work, 3D objects, custom jobs

Application

Wattsan — designed and engineered for business owners

Reinforced gantry

The gantry wall thickness is 5 to 7 mm (in the corners). The gantry has a large safety margin for additional equipment with camera, autofocus or 4 laser heads. Thus, a machine with one cutting head has 4 times the safety margin.
1:4 belt gearbox

The belt gearbox converts speed into force and splits the pitch thereby improving the engraving quality. Another function of the belt gearbox is to reduce the load on the stepper motor.
2 laser heads

The parallel operation of two laser heads allows you to double the productivity of the machine, which is quite useful for processing fabrics and producing souvenirs, puzzles, etc. The laser heads can divide the working field in half (for cutting or engraving large items) or work in close proximity to each other. A single laser head can also be used for the production of particularly large items.
3-phase stepper motor

The smaller discretisation compared to a 2-phase stepper motor provides higher accuracy. The reliability of 3-phase motors ensures years of operation without replacement or repair.

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Experiences from enthusiastic bloggers

This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

Riccardo Muscarella
Machine has a perfectly flat surface. It makes repetitive work easier for me!

Matteo Moras
Great job done within an hour. Thanks to the speed of the laser CO2 machine.

Roberto D'Adago
This model is great, and laser precision is crazy, it’s sharp as a razor!

Roger Jungo

Installation type:: Floor-standing

Through table:: Yes

Working table lowering depth:: 40 mm

Weight:: 770 kg

Machine size:: 2200 x 1800 x 1105 mm

Packing size:: 2300 x 1980 x 1200 mm

Working area:: 1600x1000 mm

Materials:: Stone, Leather and leatherette, Paper, Rubber, Fur, Paronite, MDF and chipboard, Plastic, Plexiglas, Acrylic, Plywood, Denim, Wood, Fabric, Cardboard

Laser type:: Sealed CO2 laser tube

Laser power:: 100-130 W

Laser tube lifetime:: 10000 h

Max. cutting thickness (wood):: 10-13 mm

Positioning precision:: 0,03 mm

ZnSe lens:: D20 F50.8

Min. letter size for engraving:: 1,5x1,5 mm

Laser tube:: Reci W4

Focal length:: 50 mm

Diameter of mirrors:: 25 mm

Table model:: Net table

Cooling:: Water

X-Y axis structure:: Roller metal, metal rollers

Engraving speed:: 0-600 mm/s

Cutting speed:: 0-400 mm/s

Engine on X and Y:: Stepper motors (three-phase)

Supported format:: DSB, BMP, AI, WMF, WBMP, DXF, TGA, SKA, CUR, RAS, PNM, JPC, PCX, JBG, ICO, GIF, PNG, PLT, PDF, PGX, MNG, PNT, RAW, EMF, TIF, JPEG, DST, JPG, DWG, TIFF

Electric power supply:: 220 V

Software:: RD Works

Control system:: Ruida RDC 6445G

File transfer:: USB, LAN

Power consumption:: 3500 W

Included kit

USB flash drive
Hex wrench set
Manual
Air compressor
Water pump
Ethernet cable
Power cable
USB cable
Silicone sealent
Masking tape
Hose barb
Silicon tube set

Frequently Asked Questions

First of all you should decide what are you going to use the machine for, what kind of material would it be and it's size (length and thickness). This will help determine the required power of the laser tube as well as the size of the working area. You can also write or call us, we will be happy to help you choose the right machine for your tasks and budget
Laser engraving machine is a piece of computer numerical control (CNC) equipment that uses a laser beam to engrave necessary graphic information (image or inscriptions) on various surfaces.
Engraving is the effect on the material in depth. Marking on the other hand only changes the color of the material.
Using CO2 laser machine you can engrave any type of wood materials: solid wood, plywood, MDF and others.