Laser machine WATTSAN 1610 ST

Working area:: 1600x1000 mm
Laser power:: 100-130 W
Working table lowering depth:: 40 mm
Positioning precision:: 0,03 mm
Machine size:: 1505 x 2200 x 670 mm + if it is on wheels 315 mm
Packing size:: 2300 x 1600 x 810 mm
Weight:: 442 kg

Laser Cutting Engraving Machine 130W co2 WATTSAN 1610 ST

Ruida 6445G control system
Extensive upgrade options
High precision and speed
Framed structure
Lifelong support

Laser Cutting Engraving Machine 130W co2 WATTSAN 1610 ST slide 1
Laser Cutting Engraving Machine 130W co2 WATTSAN 1610 ST slide 1
Laser Cutting Engraving Machine 130W co2 WATTSAN 1610 ST slide 2
Laser head with extended nozzle allows no soot during engraving
Easy-to-use adjustment screws of the optical system
3-phase stepper motors
Inductive end sensors
3M belts
Anodised blades prevent the laser beam from backfiring onto the material when cutting
PMI profile linear guides guarantee high accuracy
Universal laser tube mounts
Polyurethane blower hoses withstand up to 8 atmospheres
Polyurethane blower hoses withstand up to 8 atmospheres
Separation of the water system and the machine's electrical system into opposite parts of the machine
Laser Cutting Engraving Machine 130W co2 WATTSAN 1610 ST slide 14
Laser Cutting Engraving Machine 130W co2 WATTSAN 1610 ST slide 15
Laser Cutting Engraving Machine 130W co2 WATTSAN 1610 ST slide 16
Laser Cutting Engraving Machine 130W co2 WATTSAN 1610 ST slide 17

Wattsan 1610 ST — a reliable working laser cutting machine

Co2 Laser Cutting Engraving Machine Wattsan 1610 ST works 24/7. The equipment is easy to set up, manage and service. 1600×1000 mm working area with 160 mm working table lowering depth allows processing different materials such as wood, cardboard, acrylic, glass, rubber, etc. The machine has a through table. The design of the equipment allows you to remove the front wall and use it for cutting fabric rolls or sheets of plastic and plywood. The machine will not need to re-cut the workpiece, which will reduce the time and cost of the final product.

The nozzle with a diameter of 6 mm makes the air flow more diffuse, so that it does not nail the products of combustion and cutting to the surface of the material, so that there is no carbon deposits after engraving. This means that you don't need post-processing on Wattsan laser machines.

Materials

– engraving
– cutting

Wool
Resin
Marble
Granite
Bamboo products
Crystale jade
Ceramic tile
Paronite
Stone
Glass
MDF
Foam rubber
Polyethylene foam
Plexiglass (Acrylic)
Fabric
Leather
Rubber
Plastic
Cardboard
Plywood
Wood

Wattsan laser machines are thoughtfully designed

Frame structure

The main feature and base of Wattsan machines is a frame structure. The frame design ensures vibration-free operation at high speeds during engraving. This makes the machines less likely to require maintenance. Machine frames are continually being improved to increase the rigidity of Wattsan machines.
Well-arranged waste collection compartment

All Wattsan machines are equipped with a funnel-shaped container to collect cutting products. The funnel also has the function of reinforcing the machine structure. In addition, the container improves smoke extraction and protects the mechanical parts of the machine from wastes.
Reinforced gantry

The gantry wall thickness is 5 to 7 mm (in the corners). The gantry has a large safety margin for additional equipment with camera, autofocus or 4 laser heads. Thus, a machine with one cutting head has 4 times the safety margin.

Wattsan - designed and engineered for business owners

3-phase stepper motor

A 3-phase stepper motor is more accurate than a 2-phase stepper motor and has increased reliability and longer service life.
1:4 belt gearbox

The belt gearbox converts speed into force and splits the pitch thereby improving the engraving quality. Another function of the belt gearbox is to reduce the load on the stepper motor.
Unique laser head

The anodized laser head is backfiring protected and allows you to use all types of lenses (short-, medium-, and long-focus). For engraving, an extended nozzle is recommended, while for cutting, a narrowed nozzle is the better choice to increase blowing force.
Central positioning of the stepper motor in the Y axis

On Wattsan machines, the stepper motor is centrally located to ensure an even movement of the gantry along the Y-axis. This positioning and the use of couplings prevents the gantry overbalance.

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Experiences from enthusiastic bloggers

I’m extremely happy with the device! Its powerful reinforced frame reduces wobbling which is perfect for engraving at high speeds. I’ve been using it for acrylic glass and the results look really cool.

Heinrich Schüür
A great laser engraver, it can cut significant thicknesses of wood without effort. I used it for both engraving and cutting, and the machine worked wonderfully.

Il Makerstauratore
This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

Riccardo Muscarella
Machine has a perfectly flat surface. It makes repetitive work easier for me!

Matteo Moras
Great job done within an hour. Thanks to the speed of the laser CO2 machine.

Roberto D'Adago
This model is great, and laser precision is crazy, it’s sharp as a razor!

Roger Jungo

Working area:: 1600x1000 mm

Through table:: Yes

Working table lowering depth:: 40 mm

Weight:: 442 kg

Machine size:: 1505 x 2200 x 670 mm + if it is on wheels 315 mm

Packing size:: 2300 x 1600 x 810 mm

Materials:: Wood, Stone, Paper, Paronite, Plastic, Plexiglas, Plywood, Rubber, MDF and chipboard, Fabric, Acrylic, Cardboard

Diameter of mirrors:: 25 mm

Laser type:: Sealed CO2 laser tube

Laser power:: 100-130 W

Max. cutting thickness (wood):: 10-13 mm

Laser tube lifetime:: 10000 h

Positioning precision:: 0,03 mm

ZnSe lens:: D20 F50.8

Laser tube:: Reci W4

Min. letter size for engraving:: 1,5x1,5 mm

Focal length:: 50 mm

Table model:: Lamels

Cooling:: Water

X-Y axis structure:: Linear guide AMT PMI MSB 15S

Engraving speed:: 0-700 mm/s

Cutting speed:: 0-500 mm/s

Engine on X and Y:: Stepper motors (three-phase)

File transfer:: USB, LAN

Power consumption:: 2000 W

Supported format:: RAW, RAS, PNT, PNM, PNG, PLT, PGX, PDF, PCX, MNG, JPG, JPEG, JPC, GIF, JBG, ICO, BMP, EMF, DXF, DST, DWG, DSB, CUR, AI, WMF, SKA, TGA, TIF, TIFF, WBMP

Electric power supply:: 220 V

Software:: RD Works

Control system:: Ruida RDC 6445G

Frequently Asked Questions

First of all you should decide what are you going to use the machine for, what kind of material would it be and it's size (length and thickness). This will help determine the required power of the laser tube as well as the size of the working area. You can also write or call us, we will be happy to help you choose the right machine for your tasks and budget
Laser engraving machine is a piece of computer numerical control (CNC) equipment that uses a laser beam to engrave necessary graphic information (image or inscriptions) on various surfaces.
Engraving is the effect on the material in depth. Marking on the other hand only changes the color of the material.
Using CO2 laser machine you can engrave any type of wood materials: solid wood, plywood, MDF and others.