Laser machine WATTSAN 6090 LT

Working area:: 600x900 mm
Laser power:: 90-100 W
Working table lowering depth:: 160 mm
Positioning precision:: 0,03 mm
Machine size:: 1030 x 1490 x 670 mm + if it is on wheels 315 mm
Packing size:: 1110 x 1580 x 755 mm
Weight:: 230 kg

Laser Cutting Engraving Machine WATTSAN 6090 LT

Ruida 6445G control system
Increased thickness of housing
High precision and speed
Framed structure
Lifelong support

Laser Cutting Engraving Machine WATTSAN 6090 LT slide 1
Laser Cutting Engraving Machine WATTSAN 6090 LT slide 1
Laser Cutting Engraving Machine WATTSAN 6090 LT slide 2
Laser head with extended nozzle allows no soot during engraving
Easy-to-use adjustment screws of the optical system
3-phase stepper motors
Inductive end sensors
3M belts
Anodised blades prevent the laser beam from backfiring onto the material when cutting
Laser Cutting Engraving Machine WATTSAN 6090 LT slide 9
PMI profile linear guides guarantee high accuracy
Universal laser tube mounts
Polyurethane blower hoses withstand up to 8 atmospheres
Polyurethane blower hoses withstand up to 8 atmospheres
Separation of the water system and the machine's electrical system into opposite parts of the machine
Laser Cutting Engraving Machine WATTSAN 6090 LT slide 15
Laser Cutting Engraving Machine WATTSAN 6090 LT slide 16
Laser Cutting Engraving Machine WATTSAN 6090 LT slide 17
Laser Cutting Engraving Machine WATTSAN 6090 LT slide 18
Laser Cutting Engraving Machine WATTSAN 6090 LT slide 19

Wattsan 6090 LT — a reliable working laser cutting machine

CO2 laser cutting machine Wattsan 6090 LT works around the clock for the benefit of its owners, the equipment is easy to set up, operate and maintain. The working field of 900×600 mm with a depth of lowering of the working table of 160 mm allows you to handle different materials: wood, cardboard, acrylic, glass, rubber, etc. The machine has a through table, which is the opening rear lid of the machine. If you remove it, you can process materials of any length on the machine, such as fabric in rolls or sheets of plastic and plywood. The machine does not need to re-cut the workpiece, which reduces the time and cost of the final product.

A slight overpayment for the hoisting mechanism will allow you to work with large and thick materials, as well as to make orders for products that can be made on a pivot axis. And, as the cherry on the cake - with the lift table it is very convenient to adjust the focus, no need to unscrew, raise and lower the working head every time.

Materials

– engraving
– cutting

Wool
Resin
Marble
Granite
Bamboo products
Crystale jade
Ceramic tile
Paronite
Stone
Glass
MDF
Foam rubber
Polyethylene foam
Plexiglass (Acrylic)
Fabric
Leather
Rubber
Plastic
Cardboard
Plywood
Wood

Wattsan laser machines are thoughtfully designed

Frame structure

The main feature and base of Wattsan machines is a frame structure. The frame design ensures vibration-free operation at high speeds during engraving. This makes the machines less likely to require maintenance. Machine frames are continually being improved to increase the rigidity of Wattsan machines.
Well-arranged waste collection compartment

All Wattsan machines are equipped with a funnel-shaped container to collect cutting products. The funnel also has the function of reinforcing the machine structure. In addition, the container improves smoke extraction and protects the mechanical parts of the machine from wastes.
Reinforced gantry

The gantry wall thickness is 5 to 7 mm (in the corners). The gantry has a large safety margin for additional equipment with camera, autofocus or 4 laser heads. Thus, a machine with one cutting head has 4 times the safety margin.

Wattsan - designed and engineered for business owners

3-phase stepper motor

A 3-phase stepper motor is more accurate than a 2-phase stepper motor and has increased reliability and longer service life.
1:4 belt gearbox

The belt gearbox converts speed into force and splits the pitch thereby improving the engraving quality. Another function of the belt gearbox is to reduce the load on the stepper motor.
Unique laser head

The anodized laser head is backfiring protected and allows you to use all types of lenses (short-, medium-, and long-focus). For engraving, an extended nozzle is recommended, while for cutting, a narrowed nozzle is the better choice to increase blowing force.
Central positioning of the stepper motor in the Y axis

On Wattsan machines, the stepper motor is centrally located to ensure an even movement of the gantry along the Y-axis. This positioning and the use of couplings prevents the gantry overbalance.

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Experiences from enthusiastic bloggers

I’m extremely happy with the device! Its powerful reinforced frame reduces wobbling which is perfect for engraving at high speeds. I’ve been using it for acrylic glass and the results look really cool.

Heinrich Schüür
A great laser engraver, it can cut significant thicknesses of wood without effort. I used it for both engraving and cutting, and the machine worked wonderfully.

Il Makerstauratore
This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

Riccardo Muscarella
Machine has a perfectly flat surface. It makes repetitive work easier for me!

Matteo Moras
Great job done within an hour. Thanks to the speed of the laser CO2 machine.

Roberto D'Adago
This model is great, and laser precision is crazy, it’s sharp as a razor!

Roger Jungo

Weight:: 230 kg

Machine size:: 1030 x 1490 x 670 mm + if it is on wheels 315 mm

Packing size:: 1110 x 1580 x 755 mm

Working area:: 600x900 mm

Through table:: Yes

Working table lowering depth:: 160 mm

Materials:: Wood, Stone, Plywood, Rubber, Plexiglas, Plastic, Paronite, Paper, MDF and chipboard, Fabric, Leather and leatherette, Denim, Cardboard, Acrylic

Positioning precision:: 0,03 mm

ZnSe lens:: D20 F50.8

Min. letter size for engraving:: 1,5x1,5 mm

Laser tube:: Reci W2

Focal length:: 50 mm

Diameter of mirrors:: 25 mm

Laser type:: Sealed CO2 laser tube

Laser power:: 90-100 W

Laser tube lifetime:: 15000 h

Max. cutting thickness (wood):: 10-13 mm

X-Y axis structure:: Linear guide AMT PMI MSB 15S

Engraving speed:: 0-700 mm/s

Cutting speed:: 0-500 mm/s

Engine on X and Y:: Stepper motors (three-phase)

Table model:: Lamels

Cooling:: Water

Automatic working table lift:: Yes

Electric power supply:: 220 V

Software:: RD Works

Control system:: Ruida RDC 6445G

File transfer:: USB, LAN

Power consumption:: 1550 W

Supported format:: JPC, JPG, JPEG, JBG, ICO, GIF, EMF, DXF, DWG, DST, DSB, CUR, BMP, AI, PCX, PDF, TGA, MNG, WMF, WBMP, TIFF, TIF, PLT, PNG, PNM, PNT, RAS, RAW, SKA, PGX

Frequently Asked Questions

First of all you should decide what are you going to use the machine for, what kind of material would it be and it's size (length and thickness). This will help determine the required power of the laser tube as well as the size of the working area. You can also write or call us, we will be happy to help you choose the right machine for your tasks and budget
Laser engraving machine is a piece of computer numerical control (CNC) equipment that uses a laser beam to engrave necessary graphic information (image or inscriptions) on various surfaces.
Engraving is the effect on the material in depth. Marking on the other hand only changes the color of the material.
Using CO2 laser machine you can engrave any type of wood materials: solid wood, plywood, MDF and others.

Leave your review or question:

No reviews yet

Joel
22/04/2024

Need a machine to cut carbon fiber sheets

Would like some recommendations

Garrett
22/04/2024

Hello, Joel!

When it comes to Wattsan CO2 machines it all comes down to the specifics of your project: amount and size of the material blanks, work place area and so on. For example, this particular model comes with a lifting table function that allows lowering the working area up, so the rotary device may be installed to diversify your production.

However, you would definitely need a RECI W6 130-160W laser tube to cut carbon fiber effectively. If you have more questions or want to share more details about your project, please, feel free to ask here or contact our managers to consult you more thoroughly.

Thank you for reaching out!