Laser marker WATTSAN RF DAVI In stock

Working area:: 220x220 mm
Laser power:: 50-60 W
Machine size:: 1250x350x1230 mm
Packing size:: 1250x200x530 mm
Weight:: 110 kg

All characteristics

From 8 571 € ex.VAT

Price on request

Make a request

Adjustable tripod
No consumables required
No water cooling required
High precision and speed
Sino-Galvo scanner

1 / 4

WATTSAN RF DAVI laser marker – a functional machine for your production

WATTSAN RF DAVI is a high-precision, high-speed bench-type laser marker machine with RF DAVI CO2 transmitter, it is designed for working with non-metallic materials, including wood, plywood, paper, rubber, leather, ceramics, glass (including borosilicate glass), plastic and other materials. The machine height allows marking large products.

The machine is equipped with DAVI laser transmitter with a choice of power of 30 or 50 W. With a 50 W transmitter, the quality and speed of marking are commensurate with that of an 80-100 watt CO2 transmitter. However, the service life of RF DAVI is up to 40 000 hours.

The machine is controlled via EzСad system which changes the text in real time during laser treatment. Excel sheets are supported. EzCad intuitive interface allows mastering new equipment in a matter of few hours. Vector and bit map formats of images are supported, for example: BMP, PLT, CDR, DXF, AI, SVG, etc., and the software has a built-in generator for marking and barcoding.

Materials

– engraving
– marking

Wood
Plywood
Cardboard
Chipboard
Plastic
Rubber
Leather
Plexiglass (Acrylic)
Polyethylene
Bamboo products

Wattsan laser markers are easy and convenient to use

RF DAVI transmitter

Laser marker is equipped with CO2 RF DAVI transmitter with a power of 30 or 50 W that allows marking non-metallic materials with high speed and efficiency. With low power, this transmitter has a record-long service life of 40 000 hours.
Focal distance is customized

By reducing the screw pitch, linear marking on the housing and focal distance adjustment flywheel allows you to adjust the scanner along Z-axis as smoothly as possible to meet your needs. The tripod allows working even with large products exceeding the Z-axis size.
F-Theta lens

The size of the work area changes depending on the size of the installed lens. WATTSAN laser markers are equipped with lenses of two sizes – 85 and 79 mm. If you work in depth on small layouts, it is better to install a lens field diameter, the beam will be thinner and the result will be of higher quality.

High precision, high speed — high results

Wattsan's machine are comprised from a variety of finest components

When using lenses with a working area of 75x75 mm. They have larger efficiency due to the smaller spot size. You get a very thin line, which is necessary when working with materials in depth, and if you need to engrave large-area products, use a lens of 300 * 300 mm.
We use lenses with a universal mounting thread diameter of 85 mm.
For working with uneven surfaces, achieving different shades or engraving in depth, your machine can be equipped with an autofocus system.
Combines the working beam and the red pilot beam, which makes it easier to position the layout.
To withstand long and continuous operations

MOPA laser (M7 series)

Latest technology for high-quality results on a wide range of materials. Maintains peak power at all frequencies. Perfect for detailed markings that require extra precision and even jewellery work. MOPA allows you to have: a high peak value, better control over the frequencies, and control over pulse width. That results in a wider color palette and better quality of marking and engraving.

2 – 200 ns

Pulse Duration

1 kHz – 4000 kHz

Pulse frequency range

Short, adjustable

Peak power rise time
Q-switch laser

Budget-friendly technology for basic operations and reliable results. Ideal for precise cutting of tough metals and efficient processing of large material quantities. When it comes to blackening and graying plastic materials, Q-switching is quicker than MOPA, although being less exact. Well-suited for basic tasks like QR and bar-code marking.

70 – 170 ns

Pulse duration

20 – 200 kHz

Pulse frequency range

Long, fixed

Peak power rise time

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Experiences from enthusiastic bloggers

This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

Riccardo Muscarella
Machine has a perfectly flat surface. It makes repetitive work easier for me!

Matteo Moras
Great job done within an hour. Thanks to the speed of the laser CO2 machine.

Roberto D'Adago
This model is great, and laser precision is crazy, it’s sharp as a razor!

Roger Jungo

Machine size:: 1250x350x1230 mm

Packing size:: 1250x200x530 mm

Weight:: 110 kg

Working area:: 220x220 mm

Materials:: Plastic, Metal, Rubber, Fabric, Ceramic

Laser power:: 50-60 W

Wave length:: 9,3 nm

Emitter life:: 40 000 h

Laser type:: DAVI

Laser output frequency:: 20 000

Marking speed:: 7000

Cooling:: Аir

Table model:: Static

Supported format:: AI, PLT, DXF, SVG, BMP, JPEG, GIF, PNG

Control system:: LMCUSBv1

Software:: EzCad 2 piece

Rotary device (optional):: Any

Ask questions

Laser markers usually have small working area: from 100*100 to 300*300. You should keep it in mind while choosing the machine.Then you should decide what type of material are you going to work with. For exaple Co2 marker is good for wood, plastic and plexiglass. If you want to mark metal then you should pick fiber laser marker. The choice of emitter depends on the desired result. For example, if you want to do color marking on metal, then IPG or JPT are an excellent choice.
It is a permanent image resistant to mechanical damage, acidic and alkaline media, high and low temperatures.
It depends on your application. The main selection criterion is the emitter power and the lens. For quick deep engraving or working on highly reflective metals, it is better to use emitters with a power of 50W and a lens with a working area of 110x100mm. For high quality marking a 20-30W emitter and a 200x200 or 300x300 mm lens will do the trick. For more details, please contact Virmer managers: +31208082045, е-mail: info@virmer.com
For the hobby, budget markers with MaxPhotonics or Raycus emitters are suitable. However, if your hobby is jewellery making, you should consider machines with IPG emitters from 50W. For more details, please contact Virmer managers: +31208082045,
е-mail: info@virmer.com
CO2 laser sources mark and engrave organic materials: plywood and all types of wood-based materials, paper and cardboard, leather and faux leather, fabric, glass and mirror, plastics and rubber, stone and ceramics. Fiber emitters mark and engrave metals (ferrous metals, stainless steel, aluminium, titanium, etc), plastics and rubber, leather and faux leather.