Laser marker WATTSAN FL TT In stock

Working area:: 300x300, 200x200, 110x110 mm
Laser power:: 20-100 W
Machine size:: 740x400x740 mm
Packing size:: 820x490x850 mm
Weight:: 52 kg

All characteristics

Watch the review

From 2 918 € ex.VAT

Price on request

Make a request

Sino-Galvo scanner
High precision and speed
Wide variety of colors and shades
No consumables required
Engraving and marking

WATTSAN FL TT laser marker allows the processing of large products

WATTSAN FL TT is an updated functional bench-type fiber laser marker machine with a new housing and a solid-state transmitter (IPG, Max Photonics, Raycus, JPT) which is used for marking and engraving on all metals and their alloys, plastic, leather, rubber, fabrics with inorganic fillers or dies, glasses and other materials. The machine is used for applying barcodes, serial numbers, branding of souvenirs, tableware, cooking utensils, etc.

The optimized space inside the housing makes it 15% more compact. The marker head can be turned and the tripod can be fixed for processing large products. Also, if necessary, the tripod can be removed and the module with the scanner can be suspended from the ceiling. This is used when engraving large workpieces. Depending on the selected lens, the marker can be equipped with a work area with the following dimensions: 110х110 mm, 200х200 mm, 300х300 mm

The machine is controlled via EzСad system which changes the text in real time during laser treatment. Excel sheets are supported. EzCad intuitive interface allows mastering new equipment in a matter of few hours. Vector and bit map formats of images are supported, for example: BMP, PLT, CDR, DXF, AI, SVG, etc., and the software has a built-in generator for marking and barcoding.

Materials

– engraving
– marking

Carbon steel
Aluminium
Copper
Brass
Titanium
Glass
Stone
Leather
Plastic
Plexiglass (Acrylic)
Cardboard

Wattsan laser markers are easy and convenient to use

Ability to work with large products

The design allows rotation of the scanner at the desired angle and fixing the tripod in a convenient way for handling large products. Also, if necessary, the marking scanner can be removed from the tripod and suspended to the ceiling which allows engraving large workpieces.
F-Theta lens

The size of the work area changes depending on the size of the installed lens. WATTSAN laser markers are equipped with lenses of two sizes – 85 and 79 mm. If you work in depth on small layouts, it is better to install a lens field diameter, the beam will be thinner and the result will be of higher quality.
Focal distance is customized

By reducing the screw pitch, linear marking on the housing and focal distance adjustment flywheel allows to adjust the scanner along Z-axis as smoothly as possible to meet your needs.
2-in-1 laser marker

A rotating device can be installed on the laser marker for working with cylindrical, conical, spherical and other shapes. The device holds even fragile materials securely without damaging them and scratching the surface.

High precision, high speed — high results

Wattsan's machine are comprised from a variety of finest components

When using lenses with a working area of 75x75 mm. They have larger efficiency due to the smaller spot size. You get a very thin line, which is necessary when working with materials in depth, and if you need to engrave large-area products, use a lens of 300 * 300 mm.
We use lenses with a universal mounting thread diameter of 85 mm.
For working with uneven surfaces, achieving different shades or engraving in depth, your machine can be equipped with an autofocus system.
Combines the working beam and the red pilot beam, which makes it easier to position the layout.
To withstand long and continuous operations

MOPA laser (M7 series)

Latest technology for high-quality results on a wide range of materials. Maintains peak power at all frequencies. Perfect for detailed markings that require extra precision and even jewellery work. MOPA allows you to have: a high peak value, better control over the frequencies, and control over pulse width. That results in a wider color palette and better quality of marking and engraving.

2 – 200 ns

Pulse Duration

1 kHz – 4000 kHz

Pulse frequency range

Short, adjustable

Peak power rise time
Q-switch laser

Budget-friendly technology for basic operations and reliable results. Ideal for precise cutting of tough metals and efficient processing of large material quantities. When it comes to blackening and graying plastic materials, Q-switching is quicker than MOPA, although being less exact. Well-suited for basic tasks like QR and bar-code marking.

70 – 170 ns

Pulse duration

20 – 200 kHz

Pulse frequency range

Long, fixed

Peak power rise time

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

FL TT with MOPA

With MOPA you can adjust the pulse frequency and pulse duration in a wide range. With the right parameters, you can colour mark stainless steel and other metals! Let's do an experiment. In this video we will show how the temperature of the material itself affects the colour marking result.

Experiences from enthusiastic bloggers

This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

Riccardo Muscarella
Machine has a perfectly flat surface. It makes repetitive work easier for me!

Matteo Moras
Great job done within an hour. Thanks to the speed of the laser CO2 machine.

Roberto D'Adago
This model is great, and laser precision is crazy, it’s sharp as a razor!

Roger Jungo

Working area:: 300x300, 200x200, 110x110 mm

Installation type:: Bench-type

Rotator seats:: Yes

Machine size:: 740x400x740 mm

Packing size:: 820x490x850 mm

Weight:: 52 kg

Materials:: Plastic, Metal, Leather, Fabric, Rubber

Diameter of mirrors:: 85 mm

ZnSe lens:: F-Theta D80

Laser type:: IPG, MAX, RAYCUS

Laser output frequency:: 20-60 / 20-80 / 20-200

Laser power:: 20-100 W

Wave length:: 1064-1069 nm

Emitter life:: 100 000 h

Marking speed:: 7000

Cooling:: Аir

Table model:: Static

Electric power supply:: 220 V

Software:: EzCad 2

Control system:: BJJCZ Fiber-M

Supported format:: AI, PLT, DXF, SVG, BMP, JPEG, GIF, PNG

Power consumption:: 700 W

Controller:: BJJCZ Fiber-M

Rotary device (optional):: Option

Included kit

USB flash drive
Hex wrench set
Protective glasses with a case
The marker pedal (Foot switch)
Metal ruler
Key set
Clamping lever
Jaw plate set
Power cable
USB cable

Ask questions

Laser markers usually have small working area: from 100*100 to 300*300. You should keep it in mind while choosing the machine.Then you should decide what type of material are you going to work with. For exaple Co2 marker is good for wood, plastic and plexiglass. If you want to mark metal then you should pick fiber laser marker. The choice of emitter depends on the desired result. For example, if you want to do color marking on metal, then IPG or JPT are an excellent choice.
It is a permanent image resistant to mechanical damage, acidic and alkaline media, high and low temperatures.
It depends on your application. The main selection criterion is the emitter power and the lens. For quick deep engraving or working on highly reflective metals, it is better to use emitters with a power of 50W and a lens with a working area of 110x100mm. For high quality marking a 20-30W emitter and a 200x200 or 300x300 mm lens will do the trick. For more details, please contact Virmer managers: +31208082045, е-mail: info@virmer.com
For the hobby, budget markers with MaxPhotonics or Raycus emitters are suitable. However, if your hobby is jewellery making, you should consider machines with IPG emitters from 50W. For more details, please contact Virmer managers: +31208082045,
е-mail: info@virmer.com
CO2 laser sources mark and engrave organic materials: plywood and all types of wood-based materials, paper and cardboard, leather and faux leather, fabric, glass and mirror, plastics and rubber, stone and ceramics. Fiber emitters mark and engrave metals (ferrous metals, stainless steel, aluminium, titanium, etc), plastics and rubber, leather and faux leather.

Leave your review or question:

No reviews yet

Bakhti
26/07/2024

Bonjour
Nous recherchons une machine pour graver des pièces et lingots en or et argent personnalisé et peut être de la découpe et gravure en relief ?
Avez vous une machine et former vous à son utilisation ?
Cordialement

Garrett
26/07/2024

Bonjour, Bakhti !

Bien sûr ! Pour cela, nous recommandons une machine de 60W avec MOPA équipée de lentilles 75x75 ou 100x100.

Nous assurons un service après-vente et pouvons vous conseiller à distance sur la meilleure approche pour vos tâches. Le manuel d'instructions est également fourni avec les machines. Nous vous remercions pour votre question !
Jan Hlaváč
21/04/2024

Hello, i am looking for table fiber MOPA laser with IPG laser source, around 30 W.

Garrett
21/04/2024

Hello, Jan!

This marker fits your parameters, but MOPA technology requires a JPT laser source to be installed. Which is an option we can easily provide for you. Our managers will contact you as soon as possible. Thank you for your question!