Fiber metal cutting machine WATTSAN 1530 S

Work area:: 1500x3000 mm
Laser power:: up to 6000 W
Weight:: 2640 kg

Cypcut/Cyptube software
Extensive upgrade options
Guide rail protection
Framed structure
3 years warranty on the emitter

Fiber metal cutting machine WATTSAN 1530 S slide 1
Fiber metal cutting machine WATTSAN 1530 S slide 2
Fiber metal cutting machine WATTSAN 1530 S slide 3
Fiber metal cutting machine WATTSAN 1530 S slide 4
Fiber metal cutting machine WATTSAN 1530 S slide 5
Fiber metal cutting machine WATTSAN 1530 S slide 6
Fiber metal cutting machine WATTSAN 1530 S slide 7
Fiber metal cutting machine WATTSAN 1530 S slide 8
Fiber metal cutting machine WATTSAN 1530 S slide 9
Fiber metal cutting machine WATTSAN 1530 S slide 10
Fiber metal cutting machine WATTSAN 1530 S slide 11
Fiber metal cutting machine WATTSAN 1530 S slide 12
Fiber metal cutting machine WATTSAN 1530 S slide 13

Wattsan 1530 S laser machine is a reliable working machine

The WATTSAN 1530 S laser machine cuts stainless steel, carbon steel, galvanized steel, copper, aluminum and titanium. The machine has no consumables, except for protective glass for lenses. With more intensive work the protective glass shall be replaced every week, and with less intensive - once a month.

The main advantage of the fiber laser is its high speed and accuracy of processing, as well as durability: quenching in the furnace relieves stress from the metal frame, ensuring the "indestructibility" of the frame and a service life of 10 or more years.

The machine has a working field of 1500x3000 mm. If you need a larger working table, we advise you to take a closer look at the WATTSAN 1530 TABLECHANGE model.

Wattsan S-series metal laser machines are equipped with more powerful Mitsubishi servo motors with a power of 1000 W on the X axis and 1500 W on the Y axis. This allows you to increase the movement speed up to 120 meters per minute, which gives a higher speed of materials processing.

Materials

– cutting

Carbon steel
Stainless steel
Galvanised steel
Aluminium
Copper
Brass
Titanium

Adjust the cutting process for your production

CYPCUT software has simple user-oriented controls. The implemented functions greatly simplify and optimize the cutting process.

FLYCUT
RINGCUT
NESTING
EDGESEEK
MICRO JOINT
COEDGE

FLYCUT technology allows you to determine the shortest and most efficient cutting trajectory enabling fast cutting of round and rectangular holes in sheet metal with thicknesses up to 1 mm. In this case the laser head works without lifting and lowering which ensures high speed of work and saves gas. This mode is suitable if you are manufacturing ventilation systems.
Prevents corners from melting and increases the quality of manufactured products due to the laser head looping at each corner and not stopping. The obtained corners are clear and even. RINGCUT function is suitable for working with thicker materials or for cutting products with multiple corners where precision is important, e.g. gears, monograms, souvenirs, etc.
Professional optimization of the arrangement of parts on the sheet suitable for the production of promotional products. NESTING function allows to lay out parts on the sheet as efficiently and as close to each other as possible so that there are no gaps. This allows saving material.
Allows to precisely determine the position of the sheet in the work area using three reference points. You can only put the material on the work area, specify its dimensions in the program and the machine will do everything itself. You do not need to put the material perfectly on the table.
It is used to insert micro-joints into the processing path so that the parts do not land on its side. In this case it is easy to remove the parts after cutting. This saves working head from colliding with parts during operation. This function allows producing small parts for promotional and souvenir products without losing them in the work area.
This mode allows to join lines that are close to each other, that is to join them so that the laser head does not cut in the same place. This function will greatly improve performance and reduce the operation time. This function is suitable for mass production, for example, while manufacturing workpieces, promotional and souvenir products, etc.

With the frame design of Wattsan metal cutters, you will forget about repair and downtime of the machine

Precise design

In the process of designing the machine, various tests of static and dynamic loads were carried out to identify the maximum permissible deformations of the table and the bed in order to preserve the correct geometry of the structure. Due to the selected configuration, the maximum load on the table is increased by 800 kg of distributed weight. This allows processing materials up to 15 mm thick, with a 24/7 cutting accuracy of +-0.01 mm ,and ensures the durability of the bed up to 10 years.
Frame type for your tasks

Thanks to the aluminum portal and the design precisely calculated by our engineers, the machine is completely insured against deformations and breakdowns. Depending on your tasks, Wattsan machines use portals of three types: 3rd generation aluminum portal, lightweight aluminum portal of ZL101A and GB/T17 standard, and aluminum portal with titanium for operation at speeds over 120 m/min.
Rigidity and stability

The S series machines have a full metal sheet welded bed with a cross section of 9-12 mm, which allows cutting metal up to 10 mm thick. Wattsan frames have state-of-the-art design with the main task to avoid vibration when working at design speeds and accelerations. The frame can be installed on vibration mounts or anchored to a 50 cm thick concrete cushion.
Double protection of the guides

Wattsan machines are equipped with a special metal protection of the machine corrugated surface to further maintain the cleanliness of the sliding guides, saving time and money for replacing the dust cover.
Loading rollers

Several ball bearings on the working table make it easier the sheet loading onto the table. The rollers can be mounted on the front, back or side of the machine as desired. The roller is lifted above the cutting table in such a way as to ensure optimal feeding. One of the most important advantages of this feeding system is the prevention of scratches on the material.

High-tech equipment and verified accuracy are guaranteed

Protective cover

This protects MITSUBISHI servomotors, SHIMPO planetary gearboxes and HIWIN guide rails from external influences.
Protective cover laser head

This protects the main components of the laser head.
Rail with wires

The bus allows you to store electric cables for the movement of the gantry.
Protective chain for fibreglass

The chain protects the fibre-optic cable and wires for the laser head.
Pressure sensor

This controls and regulates the gas pressure for the laser head.
HIWIN bearings

The laser head is moved by Hiwin bearings. It provides smooth running, high load capacity and low noise.
MITSUBISHI Servomotors

MITSUBISHI's servo motors have smaller dimensions, double life, minimal vibration, gears up to 2G, easy replacement and maintenance.
SHIMPO planetary gearboxes

SHIMPO planetary gearboxes convert the torque from the servo motor and transmit it to the skew gear which drives the gantry and helps it move smoothly.
HIWIN guides

HIWIN guides have high precision and reliability, low friction and easy installation. They are synonymous with “reliability”. Rail guides shall be installed on the frame under expert supervision!
LEAN helical racks

Help the machine to withstand loads at the required speed and ensure smooth gantry movement. Helical racks shall be installed on the frame under expert supervision!

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Weight:: 2640 kg

Work area:: 1500x3000 mm

Frame:: Metal sheet, Moulded with strengthening, Welded from thick-walled steel tube

Laser power:: up to 6000 W

Laser head:: Raytools/Precitec/WSX

Laser type:: Raycus / MAX Photonics / IPG

Z Engine power W:: 400 W

XY Engine power:: 1000/1500 W

Structure of XY axis:: Guides HIWIN / Helical rack LEAN / Leitesen

Structure of Z axis:: HIWIN Guides / Ball Screws

Height sensor:: Automatic capacitive

Grease system:: Automatic centralized, semi-automatic

Max. movement speed:: 100/120 m/min

Max. working speed:: Depends on the material

Additional gas:: air, argon, nitrogen, Oxygen

Repositioning accuracy:: ±0.02 mm

Software:: FSCut

Height control system:: BCS100

Type of end sensors:: Inductive

Control system:: FSCUT 2000

Power electrics:: Schneider

Ask questions

A fiber-optic laser is best suited for cutting metal, but a specially equipped CO2 laser with a high-power laser tube may also be suitable for this purpose. However, it should be borne in mind that the thickness of the metal for cutting with a CO2 laser is limited to 1.5 mm, while a fiber-optic laser is capable of cutting up to 25 mm.
The cost of an hour of laser cutting depends not only on the power of the laser machine and the speed of its operation, but also on a number of other factors, such as: the professional skills of the machine operator, the cost of renting a production room, the cost and consumption of electricity, the cost of the material itself, the amount of scrap and downtime of the machine, and much more. In order to unambiguously answer the question about the cost of an hour of laser cutting, it is necessary to take into account all these parameters.
A focused laser beam is applied to the metal surface, as a result of which it melts, the molten material is blown out of the cutting zone with the help of an auxiliary gas.
The power of the laser emitter depends on the thickness of the material being processed and the desired processing speed. For example, a 1 kW emitter will cut 1 mm thick stainless steel at a speed of 13 m/min, and a 3 kW emitter will cut the same material at a speed of about 35 m/min. Here everything depends on the budget and the expediency of using the maximum possible capacity. Although it can be said that in today's competitive realities it does not make sense to buy a laser machine with a power of less than 1 kW.

Fiber metal cutting machine WATTSAN 1530 S

Unique selling proposition

Cypcut/Cyptube software

Extensive upgrade options

Guide rail protection

Framed structure

3 years warranty on the emitter

Brief of Fiber metal cutting machine WATTSAN 1530 S