- Main
- Equipment catalog
- Laser CO2
- WATTSAN 2030 Flat Bed
Laser machine WATTSAN 2030 Flat Bed
- Working area:
- 2000x3000 mm
- Laser power:
- 100-130 W
- Working table lowering depth:
- 40 mm
- Positioning precision:
- 0,03 mm
- Machine size:
- 2400 x 3750 x 800 mm
- Packing size:
- 3860 x 2540 x 1020 mm
- Weight:
- 1075 kg

Unique selling proposition
-
Low power consumption
-
No precutting required
-
Framed structure
-
Anodized blades
-
Lifelong support
Brief of Textile Laser Cutting Machine 130W co2 WATTSAN 2030 Flat Bed
-
Textile Laser Cutting Machine 130W co2 WATTSAN 2030 Flat Bed slide 1
-
Textile Laser Cutting Machine 130W co2 WATTSAN 2030 Flat Bed slide 2
-
Laser head with extended nozzle allows no soot during engraving
-
Easy-to-use adjustment screws of the optical system
-
3-phase stepper motors
-
Inductive end sensors
-
3M belts
-
Anodised blades prevent the laser beam from backfiring onto the material when cutting
-
PMI profile linear guides guarantee high accuracy
-
Universal laser tube mounts
-
Polyurethane blower hoses withstand up to 8 atmospheres
-
Textile Laser Cutting Machine 130W co2 WATTSAN 2030 Flat Bed slide 12
-
Textile Laser Cutting Machine 130W co2 WATTSAN 2030 Flat Bed slide 13
-
Textile Laser Cutting Machine 130W co2 WATTSAN 2030 Flat Bed slide 14
-
Textile Laser Cutting Machine 130W co2 WATTSAN 2030 Flat Bed slide 15
Wattsan 2030 Flat Bed textil laser cutting machine everything you need for productivity
Wattsan 2030 Flat Bed co2 laser cutting machine is designed for flow cutting of fabric, leather, leatherette and other rolled materials. But this does not mean that the range of materials for cutting and engraving is limited only to fabric, the machine can handle plywood, cardboard, rubber, acrylic, plexiglass, wood, etc. Universal working area of 2000x3000 mm is suitable for most materials used in production and you do not need additional cutting. Thanks to this, you will reduce unnecessary costs for additional work.
The laser machine is equipped with an anodized lamella table, which eliminates shooting on the material or on the machine operator. The location of the laser tube on the portal reduces the maximum distance that the laser needs to overcome from 5 to 2 meters, which means that the laser beam is less scattered and cuts better.
Materials
-
– engraving
-
– cutting
-
Wool
-
Resin
-
Marble
-
Granite
-
Bamboo products
-
Crystale jade
-
Ceramic tie
-
Paronite
-
Stone
-
Glass
-
MDF
-
Foam rubber
-
PET
-
Plexiglas (Acrylic)
-
Fabric
-
Leather
-
Rubber
-
Plastic
-
Cardboard
-
Plywood
-
Wood
Wattsan laser machines are thoughtfully designed
-
Frame structure
The main feature and base of Wattsan machines is a frame structure. The frame design ensures vibration-free operation at high speeds during engraving. This makes the machines less likely to require maintenance. Machine frames are continually being improved to increase the rigidity of Wattsan machines.
-
Well-arranged waste collection compartment
All Wattsan machines are equipped with a funnel-shaped container to collect cutting products. The funnel also has the function of reinforcing the machine structure. In addition, the container improves smoke extraction and protects the mechanical parts of the machine from wastes.
-
Reinforced gantry
The gantry wall thickness is 5 to 7 mm (in the corners). The gantry has a large safety margin for additional equipment with camera, autofocus or 4 laser heads. Thus, a machine with one cutting head has 4 times the safety margin.
Wattsan - designed and engineered for business owners

-
Laser tube on the gantry
The laser tube is placed on a gantry to reduce the size of the laser spot on the material. When cutting solid sheet material, laser machines with a large working area are used; in order to reduce beam divergence, the laser tube is placed on the gantry.
-
3-phase stepper motor
The machines are equipped with 2-phase stepper motors along the Y axis (gantry movement) and a three-phase stepper motor along the X axis, which has a smaller step, increased reliability compared to 2-phase stepper motors, and, as a result, improved engraving quality and a service life of more than 3 years.
-
Inductive sensors
Inductive sensors offer high positioning repeatability. They are less susceptible to dust and dirt than mechanical sensors. The same sensors are used in metal cutting machines and milling machines, which speaks to their reliability.
Purchase procedure
-
Equipment selection
We assist you in making your choice of a machine matching your needs
-
Sending invoice
We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
-
Payment
In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
-
We check the machine
The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
-
Delivery or pick-up
Either a transport company or you pick up the machine from our warehouse.
-
Launching equipment
We are here to assist you whenever you need support.
Experiences from enthusiastic blogers
-
This laser engraver can engrave without any problem. How fast and easy it is able to customize products!
Riccardo Muscarella
-
Machine has a perfectly flat surface. It makes repetitive work easier for me!
Matteo Moras
-
Great job done within an hour. Thanks to the speed of the laser CO2 machine.
Roberto D'Adago
-
This model is great, and laser precision is crazy, it’s sharp as a razor!
Roger Jungo
Technical characteristics
- Weight:
- 1075 kg
- Machine size:
- 2400 x 3750 x 800 mm
- Packing size:
- 3860 x 2540 x 1020 mm
- Working area:
- 2000x3000 mm
- Installation type:
- Floor-standing
- Through table:
- Yes
- Working table lowering depth:
- 40 mm
- Materials:
- Plastic, Fabric, Plexiglas, Wood, Denim, Paronite, Plywood, Leather and leatherette, Paper, Fur, Rubber, Cardboard, MDF and chipboard
- Positioning precision:
- 0,03 mm
- ZnSe lens:
- D20 F50.8
- Min. letter size for engraving:
- 1,5x1,5 mm
- Laser tube:
- Reci W4
- Focal length:
- 50 mm
- Diameter of mirrors:
- 25 mm
- Laser type:
- Sealed CO2 laser tube
- Laser power:
- 100-130 W
- Laser tube lifetime:
- 10000 h
- Max. cutting thickness (wood):
- 10-13 mm
- X-Y axis structure:
- Linear guide AMT PMI MSB 15S
- Engraving speed:
- 0-500 mm/s
- Cutting speed:
- 0-350 mm/s
- Engine on X and Y:
- Stepper motors (three-phase)
- Table model:
- Lamels
- Cooling:
- Water
- Electric power supply:
- 220 V
- Software:
- RD Works
- Control system:
- Ruida RDC 6445G
- File transfer:
- USB, LAN
- Power consumption:
- 2800 W
- Supported format:
- AI, DSB, DST, TIFF, DWG, CUR, PDF, EMF, JPC, JBG, RAW, JPG, MNG, PGX, RAS, WBMP, WMF, TGA, JPEG, PNM, SKA, BMP, PLT, GIF, ICO, TIF, PNT, DXF, PNG, PCX
Not sure where to start?
Our managers are here to advise you
Ask questions
-
First of all you should decide what are you going to use the machine for, what kind of material would it be and it's size (length and thickness). This will help determine the required power of the laser tube as well as the size of the working area. You can also write or call us, we will be happy to help you choose the right machine for your tasks and budget
-
Laser engraving machine is a piece of computer numerical control (CNC) equipment that uses a laser beam to engrave necessary graphic information (image or inscriptions) on various surfaces.
-
Engraving is the effect on the material in depth. Marking on the other hand only changes the color of the material.
-
Using CO2 laser machine you can engrave any type of wood materials: solid wood, plywood, MDF and others.
Other products
-
Laser Cutting Machine 130W co2 WATTSAN 1610 DUOS CONVEYER Wattsan 1610 DUOS CONVEYER
- Working area:
- 1600x1000 mm
- Laser power:
- 100-130 W
- Working table lowering depth:
- 40 mm
- Positioning precision:
- 0,03 mm
- Machine size:
- 2200 x 1800 x 1105 mm
- Packing size:
- 2300 x 1980 x 1200 mm
- Weight:
- 770 kg
From 11 375 € ex.VAT
-
Popular Hit
Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 LT Wattsan 6090 LT
- Working area:
- 600x900 mm
- Laser power:
- 90-100 W
- Working table lowering depth:
- 160 mm
- Positioning precision:
- 0,03 mm
- Machine size:
- 1030 x 1490 x 670 mm + if it is on wheels 315 mm
- Packing size:
- 1110 x 1580 x 755 mm
- Weight:
- 230 kg
From 5 213 € ex.VAT
-
Laser Cutting Engraving Machine 130W co2 WATTSAN 1610 ST Wattsan 1610 ST
- Working area:
- 1600x1000 mm
- Laser power:
- 100-130 W
- Working table lowering depth:
- 40 mm
- Positioning precision:
- 0,03 mm
- Machine size:
- 1505 x 2200 x 670 mm + if it is on wheels 315 mm
- Packing size:
- 2300 x 1600 x 810 mm
- Weight:
- 442 kg
From 7 926 € ex.VAT