+31852731786 info@virmer.com

Laser machine WATTSAN 6090 ST

Working area:
600x900 mm
Laser power:
90-100 W
Working table lowering depth:
40 mm
Positioning precision:
0,03 mm
Machine size:
1030 x 1490 x 670 mm + if it is on wheels 315 mm
Packing size:
1110 x 1580 x 755 mm
Weight:
230 kg
All characteristics
Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 ST Watch the review

4 976 € ex.VAT

Price on request

Make a request
Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 ST

  • Ruida 6445G control system

  • Extensive upgrade options

  • High precision and speed

  • Framed structure

  • Lifelong support

  • Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 ST

    Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 ST

  • Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 ST

  • Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 ST

  • Laser head with extended nozzle allows no soot during engraving

  • Easy-to-use adjustment screws of the optical system

  • 3-phase stepper motors

  • Inductive end sensors

  • 3M belts

  • Anodised blades prevent the laser beam from backfiring onto the material when cutting

  • PMI profile linear guides guarantee high accuracy

  • Universal laser tube mounts

  • Polyurethane blower hoses withstand up to 8 atmospheres

  • Polyurethane blower hoses withstand up to 8 atmospheres

  • Separation of the water system and the machine's electrical system into opposite parts of the machine

  • Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 ST

  • Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 ST

  • Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 ST

  • Laser Cutting Engraving Machine 100W co2 WATTSAN 6090 ST

Wattsan 6090 ST — a reliable working laser cutting machine

Co2 Laser cutting machine Wattsan 6090 ST works 24/7. The equipment is easy to set up, manage and service. The machine has a through table. The design of the equipment allows you to remove the front wall and use it for cutting fabric rolls or sheets of plastic and plywood. The machine will not need to re-cut the workpiece, which will reduce the time and cost of the final product.

The nozzle with a diameter of 6 mm makes the air flow more diffuse, so that it does not nail the products of combustion and cutting to the surface of the material, so that there is no carbon deposits after engraving. This means that you don't need post-processing on Wattsan laser machines.

Materials

  • – engraving

  • – cutting

  • Wool

    Wool

  • Resin

    Resin

  • Marble

    Marble

  • Granite

    Granite

  • Bamboo products

    Bamboo products

  • Crystale jade

    Crystale jade

  • Ceramic tie

    Ceramic tie

  • Paronite

    Paronite

  • Stone

    Stone

  • Glass

    Glass

  • MDF

    MDF

  • Foam rubber

    Foam rubber

  • PET

    PET

  • Plexiglas (Acrylic)

    Plexiglas (Acrylic)

  • Fabric

    Fabric

  • Leather

    Leather

  • Rubber

    Rubber

  • Plastic

    Plastic

  • Cardboard

    Cardboard

  • Plywood

    Plywood

  • Wood

    Wood

Wattsan laser machines are thoughtfully designed

  • Frame structure

    The main feature and base of Wattsan machines is a frame structure. The frame design ensures vibration-free operation at high speeds during engraving. This makes the machines less likely to require maintenance. Machine frames are continually being improved to increase the rigidity of Wattsan machines.

    Frame structure

  • Well-arranged waste collection compartment

    All Wattsan machines are equipped with a funnel-shaped container to collect cutting products. The funnel also has the function of reinforcing the machine structure. In addition, the container improves smoke extraction and protects the mechanical parts of the machine from wastes.

    Well-arranged waste collection compartment

  • Reinforced gantry

    The gantry wall thickness is 5 to 7 mm (in the corners). The gantry has a large safety margin for additional equipment with camera, autofocus or 4 laser heads. Thus, a machine with one cutting head has 4 times the safety margin.

    Reinforced gantry

Wattsan - designed and engineered for business owners

img
  • 3-phase stepper motor
  • 1:4 belt gearbox
  • Unique laser head
  • Central positioning of the stepper motor in the Y axis

  • 3-phase stepper motor

    A 3-phase stepper motor is more accurate than a 2-phase stepper motor and has increased reliability and longer service life.

  • 1:4 belt gearbox

    The belt gearbox converts speed into force and splits the pitch thereby improving the engraving quality. Another function of the belt gearbox is to reduce the load on the stepper motor.

  • Unique laser head

    The anodized laser head is backfiring protected and allows you to use all types of lenses (short-, medium-, and long-focus). For engraving, an extended nozzle is recommended, while for cutting, a narrowed nozzle is the better choice to increase blowing force.

  • Central positioning of the stepper motor in the Y axis

    On Wattsan machines, the stepper motor is centrally located to ensure an even movement of the gantry along the Y-axis. This positioning and the use of couplings prevents the gantry overbalance.

Purchase procedure

  • Equipment selection

    We assist you in making your choice of a machine matching your needs

  • Sending invoice

    We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.

  • Payment

    In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.

  • We check the machine

    The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.

  • Delivery or pick-up

    Either a transport company or you pick up the machine from our warehouse.

  • Launching equipment

    We are here to assist you whenever you need support.

Experiences from enthusiastic blogers

  • Riccardo Muscarella

    This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

    Riccardo Muscarella Riccardo Muscarella
  • Matteo Moras

    Machine has a perfectly flat surface. It makes repetitive work easier for me!

    Matteo Moras Matteo Moras
  • Roberto D'Adago

    Great job done within an hour. Thanks to the speed of the laser CO2 machine.

    Roberto D'Adago Roberto D'Adago
  • Roger Jungo

    This model is great, and laser precision is crazy, it’s sharp as a razor!

    Roger Jungo Roger Jungo

Technical characteristics

Weight:
230 kg
Machine size:
1030 x 1490 x 670 mm + if it is on wheels 315 mm
Packing size:
1110 x 1580 x 755 mm
Working area:
600x900 mm
Through table:
Yes
Working table lowering depth:
40 mm
Materials:
Cardboard, Paper, Stone, Plywood, Paronite, Rubber, Leather and leatherette, Fabric, Plastic, MDF and chipboard, Acrylic, Wood, Denim, Plexiglas
Positioning precision:
0,03 mm
ZnSe lens:
D20 F50.8
Min. letter size for engraving:
1,5x1,5 mm
Laser tube:
Reci W2
Focal length:
50 mm
Diameter of mirrors:
25 mm
Laser type:
Sealed CO2 laser tube
Laser power:
90-100 W
Laser tube lifetime:
7500 h
Max. cutting thickness (wood):
10 mm
X-Y axis structure:
Linear guide AMT PMI MSB 15S
Engraving speed:
0-700 mm/s
Cutting speed:
0-500 mm/s
Engine on X and Y:
Stepper motors (three-phase)
Table model:
Lamels
Cooling:
Water
Electric power supply:
220 V
Software:
RD Works
Control system:
Ruida RDC 6445G
File transfer:
LAN, USB
Power consumption:
1500 W
Supported format:
SKA, EMF, AI, PNG, DWG, DST, JPEG, GIF, PNT, TIF, JPG, PGX, JPC, DSB, WMF, PDF, DXF, RAW, RAS, PNM, PCX, JBG, CUR, TIFF, ICO, WBMP, TGA, MNG, BMP, PLT

Ask questions

  • First of all you should decide what are you going to use the machine for, what kind of material would it be and it's size (length and thickness). This will help determine the required power of the laser tube as well as the size of the working area. You can also write or call us, we will be happy to help you choose the right machine for your tasks and budget

  • Laser engraving machine is a piece of computer numerical control (CNC) equipment that uses a laser beam to engrave necessary graphic information (image or inscriptions) on various surfaces.

  • Engraving is the effect on the material in depth. Marking on the other hand only changes the color of the material.

  • Using CO2 laser machine you can engrave any type of wood materials: solid wood, plywood, MDF and others.

Other products

Get an expert consultation

  • Warranty up to 5 years
  • Local service all over the Europe
  • Delivery guarantee
  • Showroom and Demo

By submitting your personal contact data, you give a permission to process it. Privacy Policy

Make a request
↑

We use cookies because we need them to quickly interact with our website. You can always turn them off in your browser settings. By continuing to use the site, you confirm your Consent to processing of personal data in accordance with Privacy Policy. Learn more about Cookies