Laser machine Wattsan 1820 Conveyor PRO

Working area:: 1800x2000 mm
Laser power:: 150-180 W
Positioning precision:: 0.01 mm
Machine size:: 3800 x 2300 x 1450 mm
Packing size:: 3750 x 2300 x 1600 mm
Weight:: 1000 kg

Laser Cutter for Fabric & Leather Wattsan 1820 Conveyor PRO

High performance
Conveyer table
Framed structure
Lifelong support

Wattsan 1820 Conveyor PRO for roll material cutting

With its 1800 × 2000 mm working area and automated conveyor table, the Wattsan 1820 Conveyor PRO ensures accurate and stable processing of leather, synthetic leather, linen, tweed, wool, silk, chiffon, organza, and other flexible materials used in mass production.

Lenze servo drives enable speeds up to 1200 mm/s while maintaining controlled motion and reducing idle time. The lightweight yet rigid aluminum gantry provides smooth travel, low vibration, and consistent cutting precision across the full workspace. A 150–180 W CDWG laser source delivers stable output for cutting and engraving non-metallic materials up to 25 mm thick. Combined with servo-driven motion and conveyor automation, the system ensures repeatable edge quality and efficient continuous processing.

Materials

– cutting
– engraving

Wool
Resin
Marble
Granite
Bamboo products
Crystale jade
Ceramic tile
Paronite
Stone
Glass
MDF
Foam rubber
Polyethylene foam
Plexiglass (Acrylic)
Fabric
Leather
Rubber
Plastic
Cardboard
Plywood
Wood

Wattsan laser machinesare thoughtfully designed

Lenze Servo Motors

Achieve cutting speeds of up to 1200 mm/s on fabrics and roll materials, maximizing throughput while minimizing downtime — built for nonstop industrial performance.
Lightweight Rigid Gantry

The enlarged aluminum gantry is designed to balance strength and low weight, providing smooth motion, reduced vibration, and consistent cutting precision across the entire working area, even under heavy workloads.
CDWG Laser Tube

A 150–180 W CDWG laser source ensures consistent power delivery for accurate cutting and engraving of non-metallic materials up to 25 mm thick. Combined with servo-driven motion and a conveyor system, it enables efficient processing of continuous materials with uniform edge quality and minimal heat-affected zones.
Trocen Control System

Process control is managed by the Trocen AW7824 unit, which coordinates 4-axis movement with repositioning accuracy below 0.01 mm. This level of precision helps maintain uniform geometry across large production batches, reducing scrap rates and eliminating the need for frequent recalibration or post-processing.
Conveyor Table

The integrated conveyor table enables uninterrupted material feeding and evenly distributes fabric across the cutting area, supporting continuous operation without manual repositioning. This configuration is particularly effective for long production cycles and high-volume textile workflows.

Laser Power and Smart Control Software Integration

The 150–180 W CDWG laser tube delivers stable power for clean cutting at high speeds, while Trocen Laser CAD software streamlines workflow with broad file support and built-in compatibility with CorelDRAW, AutoCAD, and Adobe Illustrator.

The 150–180 W CDWG laser tube provides stable power delivery for clean cutting results and reliable performance even at top processing speeds.
For workflow integration, Trocen Laser CAD software, a Windows-based control platform that accepts a number of file formats like G-code, AI, SVG, PDF, DXF, PLT, DST, DSB, UD5, BMP, JPG, and PNG, is used by the machine. Built-in compatibility with CorelDRAW, AutoCAD, and Adobe Illustrator simplifies file preparation and reduces setup time.

Lightweight by Design, Rigid in Performance

Constructed from high-strength aluminum alloy, the structure combines low weight with excellent rigidity for fast cutting, smooth travel, and accurate positioning.
More Power, Higher Speed

Multiple servo motor systems provide strong torque for fast acceleration up to 1200 mm/s and quick deceleration, maintaining precise cutting performance throughout the process.

Wattsan - designed and engineered for business owners

Purchase procedure

Equipment selection

We assist you in making your choice of a machine matching your needs
Sending invoice

We agree on the complete set of the machine and sending the invoice with the final cost of the equipment.
Payment

In full if the machine is in stock. 50% in advance 50% at the delivery if the machine is not in stock.
We check the machine

The 3 step quality control: at the Wattsan factory, at our warehouse in the Netherlands, before the delivery.
Delivery or pick-up

Either a transport company or you pick up the machine from our warehouse.
Launching equipment

We are here to assist you whenever you need support.

Experiences from enthusiastic bloggers and clients

I recently purchased the Wattsan metal cutter, and I am thoroughly impressed. Customer support was very helpful throughout the process.

Martin Todorov
This laser engraver can engrave without any problem. How fast and easy it is able to customize products!

Riccardo Muscarella
The Wattsan metal cutter exceeded my expectations. It’s very precise and easy to operate. Perfect for my workshop projects. Delivery was smooth, and customer service was very responsive. A great investment!

Emma Rossi
Machine has a perfectly flat surface. It makes repetitive work easier for me!

Matteo Moras
Fantastic quality and performance! The Wattsan metal cutter is powerful and reliable, making my work much more efficient. I’m very happy with this purchase. Highly recommended!

Lucas Schmidt
Great job done within an hour. Thanks to the speed of the laser CO2 machine.

Roberto D'Adago
This model is great, and laser precision is crazy, it’s sharp as a razor!

Roger Jungo

Packing size:: 3750 x 2300 x 1600 mm

Weight:: 1000 kg

Machine size:: 3800 x 2300 x 1450 mm

Through table:: Yes

Working area:: 1800x2000 mm

Materials:: Linen, Wool, Wood, Stone, Organza, Bamboo, Resin, Plywood, Chiffon, Plastic, Jade, Tweed, Paronite, Rubber, Acrylic, Silk, Leather, Faux leather, MDF, Granite, Fabric, Ceramic tile, Chipboard, Foam rubber

Laser power:: 150-180 W

Laser tube lifetime:: 10000 h

Laser tube:: CDWG

Focal length:: 63.5 mm

Positioning precision:: 0.01 mm

Laser type:: CO2

Diameter of mirrors:: 25 mm

Engraving speed:: up to 1200 mm/s

Cooling:: Water, chiller CW-6000

Cutting speed:: up to 1200 mm/s

Engine on X and Y:: Lenze servo motor

Electric power supply:: 100, 220 V

Type of end sensors:: Omron, Inductive

Power consumption:: 5000 W

File transfer:: USB, LAN

Supported format:: PLT, DST, PNG, JPG, JIF, PDF, BMP, DSB, UD5, SVG, DXF, AI

Control system:: Trocen AWC7824

Software:: Trocen LaserCAD

Power electrics:: Zhongtai

Included kit

USB flash drive
Hex wrench set
Manual
Air compressor
Water pump
Ethernet cable
Power cable
USB cable
Silicone sealent
Masking tape
Silicon tube set

Frequently Asked Questions

First of all you should decide what are you going to use the machine for, what kind of material would it be and it's size (length and thickness). This will help determine the required power of the laser tube as well as the size of the working area. You can also write or call us, we will be happy to help you choose the right machine for your tasks and budget
Laser engraving machine is a piece of computer numerical control (CNC) equipment that uses a laser beam to engrave necessary graphic information (image or inscriptions) on various surfaces.
Engraving is the effect on the material in depth. Marking on the other hand only changes the color of the material.
Using CO2 laser machine you can engrave any type of wood materials: solid wood, plywood, MDF and others.